Votre panier est vide !
 
Pour nous joindre
Contact
 
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Enregistreur de données de température et d’humidité

Enregistreur de données de température et d’humidité

Modèle :Flashlink


Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

Simple - Accurate - Economical

The FlashLink Program Manager software is very simple to use, and feature packed to allow a ful analysis of your temperature and/or humidity recordings. It can typically download in just 5 seconds and the data can be listed numerically, graphed, printed, imported to a spreadsheet or sent by email anywhere in the world.

Download TRIAL VERSION

 

Simple to use
From the start page, you can:
  • Set-up FlashLink
  • Download new recording
  • Open an existing recording

 

Set-up flashlink
The many ways you can record:
  • By tune interval, from every 3 seconds up to 24 hours.
  • By simply clicking on the calendar dates to start and stop
  • You can delay the start time from 0 second to 56 days
  • Manual start allows you to start if at the job location by pushing a button.
  • You can even let it record endlessly in the loop mode!
By setting FlashLink to record once every 50 minutes, it will continuously record for a full year!

 

Job information, alarms & more...
Seven fully customizable lines on the data tag page allows you to easily label each recording. The wide choices of alarm options give plenty of flexibility.
  • Enter your job information to identify each recording.
  • Set your high/low alarms.
  • Alarm delay prevents false alarms, like defrost cycles, door openings, etc.
  • Click "OK" and the unit will launch.

 

Downloading & ing files
Once the recording is completed, connect the Flashlink to your PC and click "Download." In just about 5 seconds, FlashLink will automatically download and make a file. 

Simply click on a file name to bring it up. Here are just some of the information it will provide:
  • Recorded temperature/humidity by sequence number, date and time.
  • Data info, like startup time, log intervals, stop time, etc.
  • Statistics such as Min/Max, average, standard de viation, etc. You can even re-select any recorded range to re-calculate the statistics.
  • Alarm events, including total time and area of the alarm.

A click on the graph icon will now show the same file in a graph form. Some of the features are:
  • Sequence marker: Place the cursor on any point on the temperature line to show the exact time and data of the event.
  • Zoom in any area for a close-up view.
  • Shade only the alarm areas.
     

The printing feature allows you to insert your company name and logo, as well as a special heading, on every report.

 

HVAC
  • Diagnosis in commercial buildings
  • Equipment performance verification
  • Air balancing
  • Energy audit
  • Property management

 

Refrigeration
  • Long-term equipment performance verification
  • Documentation of refrigeration temperature
  • Equipment diagnosis

 

Transportation
  • Temperature recording during transport
  • Quality control
  • Diagnostic of refrigeration unit

 

Food service
  • Food cooling rate analysis
  • Hot / Cold holding equipment
  • Refrigeration cases
  • HACCP compliance

 

Quality assurance
  • Recording of internal product temperature
  • Validation

 

System requirements
  • IBM compatible with 4 megs of memory. Runs on Windows 3.1, Windows 95 and 98
  • FlashLink is year 2000 compatible.
  • Software # 20210 is necessary to run any of the loggers, and only one copy is needed to run multiple units.

 

Specifications
Int Temp Sensor Range -40°F to 150°F (-40°C to 66°C)
Ext Temp Sensor Range -40°F to 302°F (-40°C to 150°C)
Ext Low Temp Sensor Range -112°F to 230°F (-80°C to 110°C)
Temperature Accuracy -112°F to 230°F (-80°C to 110°C)
±2°F (1°C) over entire range
Operating Temp Range -40°F to 130°F (-40°C to 55°C)
Operating Humidity Range 1% to 99% RH
Humidity Accuracy ±5% between 20% to 90% RH
Temperature Resolution 0.1°F or °C
Logged Data Capacity 7,900 to 10,000 data points
Data Download Time 5 seconds typical for 3,800 data points
Startup Alarm Delay Skip 1 to 16 data points
Operating Alarm Delay 0 to 79 minute delay filter as needed
Logging Time Interval Range 3 seconds to 24 hours
Programmable Delayed Start 0 second to 256 days
Water Resistance Withstands immersion up to 6 inches for washing and sanitizing
Shock Resistance 3-ft drop to hard surface
Battery Type / Life CR2450 3v Lithium /1 year
Enclosure / Size ABS plastic case, 3.25"W x 2.25"H x .75"D
Certification T.U.V. - CE Mark

 

Cat. No. Description
20202 Internal Temperature and sharp External Temperature Sensors
20204 Two Sharp External Temperature Sensors
20205 Blunt External Low Temperature Sensor (-104°F / -80°C)
20207 One internal temperature sensor and one internal humidity sensor
20209 Sharp External Temperature Sensor

 

 

Convertisseur d'unités