Votre panier est vide !
 
Pour nous joindre
Contact
Illuminateur - fibre optique à contrôle total

Illuminateur - fibre optique à contrôle total

Modèle :de série MV


Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

UNIQUE DUAL STABILIZATION CIRCUIT DESCRIPTION
Many machine vision applications require ultra-stable light output. All MV Series Illuminators provide such stabilization in an innovative and unique manner. Each illuminator essentially contains two separate power supplies. The first power supply is specifically designed for maximum efficiency (minimum internal power losses) and accomplishes this by precluding any phase shift between the voltage and the current. The second power supply takes the output of the first supply and eliminates the remaining “ripple” frequency in order to ensure that the resulting light output is stable to within ±0.5 %. This technique provides a superior solution to typical simple DC regulated power circuits that will exhibit greater ripple and less efficiency.

 

COMMON USES
Fiber Optic Illuminators are often referred to as “Cold Light” Illuminators because they provide high-intensity, focused light without the heat typically associated with high-intensity lamps.
  • Microscopes and Video Microscopes
  • Boroscopes
  • Industrial Imaging (Machine Vision)
  • Custom Process and Inspection Equipment (Wire Bonders, Laser Welding)

 

 

 

 

 

REMOTE / RS232 CONTROL
  • Control intensity via a remote control interface box, a 0-10 VDC, or a RS232 interface. Unit can also be placed into standby mode using RS232.
  • Optional remote connector permits up to eight separate illuminators to be controlled from a single remote control or RS232 interface. Ideal for Machine Vision and Metrology

 

 

APPLICATIONS
  • Dual Regulation circuits and constant color features ensure consistent imaging
  • High color temperature provides even white light
  • Enclosure maintains low temperature
  • Over temperature circuit protection
  • Integral IR heat filter

 

 

ILLUMINATION LAMP SELECTION GUIDE
 
EKE
EJA
Color Temperature
3250
3350
Voltage
21 V
21 V
Lamp Life (Hours)
200-2000
40-50
Power Rating (Watts)
150
150
Approx. Shipping Weight
1 oz.
1 oz.
 
R150-A1
R150-A2
Input Voltage
100-240 autoswitching
Remote Control I/O Connection Point
Standard
Integral RS232
Optional
Bulb Power Stabilization
Standard
AC Input Power Stabilization
Standard
Electrostatic Discharge Safe
Optional
Power Rating (Watts)
150
Electronic Brightness Control
Standard
Heat Protection Filter
Standard

Soft Start Circuitry

Standard
Filter Holder
Standard - Side insert
Stackable Enclosure
Standard
Overtemperature Protection
Standard
Standard Color
Beige with blue cover
Standard Lamp
EKE
Optional Lamp
EJA
Power Input Module
IEC
Turbo Range
Standard
Output Aperture (Inside diameter)
14.75 mm (mates with TechniQuip "B" Series Light Guides)
Width
6.6 inches
Height
4.7 inches
Length
10.9 inches
CE
Yes
UL
Conforms to UL 2601
Warranty
1 year
Approximate Shipping Weight
4 lbs.

 

Convertisseur d'unités