- Contact Us
|Fat||0,00% à 40,00%||+- 0,02%*|
|Protein||0,00% à 10,00%||+- 0,03%|
|Lactose||0,00% à 10,00%||+- 0,03%|
|SNF (fat free dry matter)||0,00% à 15,00%||+- 0,04%|
|Minerals/conductance||0,10% à 5,00%||+- 0,02%|
* The reproducibility equals +0.02 % in the 0% to 8 % fat range. In the higher ranges of 8 % to 40 % fat, the reproducibility equals 0.2
The measurement resolution is 0.01
The accuracy depends on the respective calibration.
Further parameters are determined based on calculational algorithms:
The software is continually improved with the aim of obtaining additional interesting parameters. The updates are quickly and easily transmitted overthe interfaces. In this way, the instrument is kept up-to-date over a long period of time.
High matrix tolerance
The device is characterised by a high matrix tolerance which it owes to the multi-sensor measurements systems used. This means different kinds of milk can be measuredwith the same calibration (product profile).
The operation is clear and simple. 5-key menu-driven handling: 4 arrow keys and one "enter" key. By pressing the "enter" key, the function or action, which has been 3 selected with the help of the arrow keys, is started.
You can select your preferred language from a number of menu languages. Currently, German, English, French, Spanish, among others, are available. The number of languages is continuously being expanded with help from our partners in different countries. The language is selected in the same way as with the previous settings.
For customer-specific calibration, the already existing basic calibrations are merely adjusted. This is done with a simple two point calibration (A calibration and B calibration). Each parameter is calibrated in only one step. A clear calibration menu simplifies the entry of reference values. Up to 20 different calibration data sets can be saved. Therefore, you can switch from one product to another (e.g. from milk to cream) without having to re-calibrate.
The instrument has three pumps, namely the measuring pump, the rinsing pump, and the cleaning pump, all of which are connected to the corresponding canisters. Up to five different times can be entered for various maintenance activities: rinsing, cleaning, and zero point calibration. Thus routine tasks are completed automatically.
Replacing the pump heads
The pumps are located under the stainless steel cover sheet on the left side of the instrument. The pump heads can be replaced easily without the use of tools. The old pump heads can be pulled off by pushing in on both tabs [see Fig, "X" and "Y") simultaneously. The new pump heads are set on the motor axis and pressed down on until both tabs snap into place.