Votre panier est vide !
 
Pour nous joindre
Contact
Incubateur à CO2 à chemise d'eau de base

Incubateur à CO2 à chemise d'eau de base

Modèle :2406 et 2406/2


Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

Our Basic Water Jacket Incubators are designed and manufactured to accommodate tight budgets without compromising fundamental needs in quality and precision. Combine this with the microprocessor controllers, heated outer door, and tempered-glass inner door and these units provide temperature uniformity, while minimizing cold spots that lead to condensation contamination. The humidity level inside the chamber is maintained at approximately 95%.

2406 SHEL LAB Basic CO2 Water Jacketed Incubator

Model 2406 was designed and manufactured to accommodate tight budgets, while maintaining the fundamental needs of quality and precision. These units have PID microprocessor controllers, a heated outer door and a tempered-glass inner door. They provide exceptional temperature uniformity, while minimizing cold spots that lead to condensation and ultimately, contamination. Although they do not have a humidity display, the extremely stable temperature environment maintains constant humidity through evaporation at 95%. Double wall construction reduces these unit's footprint, so they fit in tight spaces as well as tight budgets.

  • Infrared CO2 Sensor
  • Heated Outer Door
  • Independent Overtemperature Protection
  • Quick Clean Shelf System
  • 5 Year Limited Warranty

 

Specification
Infrared (IR) Sensor, 6.7 Cu.Ft. 120V
Weight  310.00 lbs
Capacity  6 cu.ft.
Interior Dimensions WxDxH in. (cm)  20 x 20 x 26 (52 x 51 x 65)
Exterior Dimensions WxDxH in. (cm)  26 x 26 x 39 (67 x 67 x 99)
Temperature Range 8°C above ambient to 60°C
Temperature Uniformity  ±0.35°C at 37°C
Electrical Specifications  Volts: 120V
Hertz: 50/60Hz
Watts: 550W
Amps: 5A
CO2 Range  0-20%
CO2 Sensor   IR
CO2 Rate  < 5 minutes
Jacket Type  Water
Relative Humidity Range to 80%
Shelving  3 Supplied (16 Maximum)

 

2406/2 SHEL LAB Basic CO2 Water Jacketed Incubator
Model 2406/2 was designed and manufactured to accommodate tight budgets, while maintaining the fundamental needs of quality and precision. These units have PID microprocessor controllers, a heated outer door and a tempered-glass inner door. They provide exceptional temperature uniformity, while minimizing cold spots that lead to condensation and ultimately, contamination. Although they do not have a humidity display, the extremely stable temperature environment maintains constant humidity through evaporation at 95%. Double wall construction reduces these unit's footprint, so they fit in tight spaces as well as tight budgets.

The audible/visual alarms for temperature and CO2 respond to out-of-tolerance conditions. They offer an independent overtemperature safety control to protect samples from overheating, and an optional CO2 tank switch/alarm to prevent prematurely exhausting the gas supply. Features include:

  • Infrared CO2 Sensor
  • Heated Outer Door
  • Independent Overtemperature Protection
  • Quick Clean Shelf System
  • 5 Year Limited Warranty

 

Specification
Dual Stacked, Infrared (IR) Sensor, 6.7 Cu.Ft. Per Chamber 120V
Weight 600.00 lbs
Capacity  13.4 cu.ft.
Interior Dimensions WxDxH in. (cm)  20 x 20 x 28 (52 x 51 x 72)
Exterior Dimensions WxDxH in. (cm)  26 x 26 x 40 (67 x 67 x 101)
Temperature Range  8°C above ambient to 60°C
Temperature Uniformity   ±0.25°C at 37°C
Electrical Specifications  Volts: 120V
Hertz: 50/60Hz
Watts: 550W
Amps: 5A
CO2 Range  0-20%
CO2 Sensor  Infrared (IR)
CO2 Rate  < 3 minutes
Jacket Type  Water
Relative Humidity Range  Up to 95%
Shelving   3 Per Chamber Supplied (16 Maximum)

 

 

Etiquettes : Incubateur, CO2, chemise, d'eau, base

Convertisseur d'unités