Votre panier est vide !
Pour nous joindre
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Pompe à seringue à haute pression

Pompe à seringue à haute pression

Fabricant :KD Scientific
Modèle :KDS 410

Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

Higher Force Pump for Demanding Applications

The New KDS410 is high pressure syringe pump which more than doubles the linear force available on the KDS 200 Series. This extra force makes the pump ideal for delivery of luid to reactors in chemical applications or for working with viscous fluids. The robust design of the syringe holder ensure the syringe is kept level during delivery of the fluid. If features two different types of clamping mechanisms, for both smaller and larger syringes. When the appliction demands a more rugged pump, select the KDS 410.

The KDS 410 features two modes of operation, a dispense mode and a withdrawal mode. It is easy to set up and use in two quick steps; select the type of syringe and the flow rate. The selectable flow rate is entered directly into the program and stored in memory. A volume can also set to dispense a known amount and then shut off when the delivery is complete.
The KDS 410 accomodate a single syringe and works with all types of syringes from 10 µl to 140 ml, but doe to the higher force on the syringe pump, we recommend our new line of stainless steel syringes. (see our stainless steel syringe data sheet.) All KDS pumps are standard with power failure indication. If there is a power failure while the pump is running in "pump" mode, display will indicate a power failure occurred and the pump will resume runnings. This feature can be supressed, requiring manual restart.

The KDS 410 can be triggered remotely by a foot pedal or a switch. This will offer the user true versatility in using the unit in a "hands-free" mode. The pump also comes standard with the RS-232 interface to link to a computer for remote control. The power reduction mode cuts power to the unit when In the idle mode, eliminating any overheating issues with the powerful motor. The KD Scientific family of pumps includes a wide variety of pumps to meet many different applications. The full line of KDS pumps includes a simple single syringe dispense only pump, a multi-syringe infuse and drawwal pump, push and pull pumps, continuous pumps for uninterrupted fluid delivery, nanoliter pumps and an emulsifier pump. KD Scientific is world renowned for its unsurpassed quality and reliability.

  • High pressure dispensing
  • Automatic dispensing of small volumes
  • Consistent delivery of fluids
  • Hands free operation
  • Accurate fluid delivery


  • Quick set up and installation
  • High pressure syringe clamps
  • Typical Accuracy 1% or better
  • Up to 100 lbs linear force
  • Wide variety of syringes from 10 µl to 140 ml
  • Wide plunger travel
  • Quick fluid filling
  • Power reduction mode
  • Volume dispense
  • Minimum flow rate of 0.001 µl/hr using 10 µl syringe
  • Maximum flow rate of 146.7 ml/min. using 140 ml syringe
  • Power failure indication
  • Anti-Syphon
  • TTL interface for remote activation
  • RS-232
  • Daisy chain up to 99 pumps together


  • Continuous delivery of fluid
  • Pilot plant reactor dosing
  • Dispensing Viscous Fluids


  • Pharmaceutical
  • Biotech
  • Chemical
  • Petrochemical
  • Neuroscience
  • Research and Devlopment
  • Government
  • Food and Beverage



Flow rates
Syringes Diameter Minimum Maximum
10µl 0.46 mm 0.001 µl/hr 21.05 µl/min
25µl 0.73 mm 0.003 µl/hr 53.04 µl/min
50µl 1.03 mm 0.005 µl/hr 105.5 µl/min
100µl 1.46 mm 0.009 µl/hr 212.1 µl/min
250µl 2.30 mm 0.021 µl/hr 526.4 µl/min
500 µl 3.26 mm 0.042 µl/hr 1.057 ml/min
1 ml 4.61 mm 0.083 µl/hr 2.115 ml/min
3 ml 8.59 mm 0.287 µl/hr 7.343 ml/min
5 ml 10.30 mm 0.413 µl/hr 10.55 ml/min
10 ml 14.57 mm 0.826 µl/hr 21.12 ml/min
20 ml 19.05 mm 1.411 µl/hr 36.11 ml/min
30 ml 21.59 mm 1.813 µl/hr 46.39 ml/min
60 ml 26.60 mm 2.751 µl/hr 83.12 ml/min
100 ml 34.90 mm 4.736 µl/hr 121.2 ml/min
140 ml 38.40 mm 5.733 µl/hr 146.7 ml/min


Model Model KDS 410
Syringe Size 10 µl to 140 ml
Fuse 115 V, 5 x 20 mm, 250 V 0.25 A T slow blow / 240 V, 0.125 A T slow blow
Voltage Operating range US 110 - 125 VAC, 0.25 A, 50/60 Hz /
CE 220 - 260 VAC, 0.125 A, 50/60 Hz
Drive mechanism Microprocessor controlled stepper motor 1/2 - 1/16 microstepping, driving a lead screw through a belt and pulley drive mechanism
Force 100 lbs
Pusher Advance / Per Micro Step 1/16 step, 0.165365 micron or 0.0000065 in
Volume Per Micro Step 1/16 step with 60 ml BD syringe 0.0917 µl
Speed Range 2.56 x 104:1
Stepping Rate
Minimum 1 µ step/120 second
Maximum 1600 1/2 steps/second
Linear Travel rate
Minimum 4.95 x 104cm/hr
Maximum 12.67 cm/hr
Flow rate Range 0.826 µl/hr to 21.12 ml/min using
10 ml syringe
Dimensions (HxWxD) 15 x 28 x 24 cm (6 x 11 x 9.5 in)
Weight 6.4 kg (14 lbs)
Syringes NOT included


  • Alarm Indication at End of Travel
  • Foot switch
  • Multi-Step Programming



Etiquettes : Pompe, seringue, haute, pression

Convertisseur d'unités