- Nous contacter
The Legato 100 has a wide flow rate range from 1.26 pl/min to 88.32 ml/min depending on syringe size. The large touch screen color display allows the user to see all of the pumps operating parameters to ensure proper operation during the experiments. Syringe size and flow rate are easily displayed as well as the volume delivered and the elapsed time. Set up is easy using the icon driven software.
The Legato 100 is an infuse only syringe pump. It accommodates a single syringe from 0.5 ul to 60 ml. Any type of syringe can be used in the unit including glass, plastic or stainless steel. The syringes are held in place by KD Scientifics' new clamping mechanism designed to hold syringes securely in place. The run screen has all of the pump parameters, as well as, the pumps running conditions. The basic pump offers the same easy to use touch screen configuration and "run" screen as the more advanced Legato 200. An led light on the front panel makes it easy to see if the pump is running. Syringe size and flow rates are easily displayed as well as the volume delivered and the elapsed time.
The pumps are versatile and multiple pumps can be connected through the RS485 interface. Advanced micro stepping techniques are employed to further reduce the step angle to eliminate flow pulsation. The accuracy is +_0.5% A wide dynamic flow range from pico liters per minute to millimeters per minute can be programmed into the pump. Add the New Adagio software to maximize the use of the pumps functions and features. Adagio allows you to configure the pump through the software as well as operate one or multiple pumps. In addition the National Instruments labview drivers are available on their website.
KD Scientific pumps are acknowledged as the industry's highest values solution for delivering precise and smooth flow. KD Scientific is recognized worldwide for quality and reliability at an economical price and has the broadest line of syringe pumps to meet your specific application. KD Scientific is committed to delivering the highest level of customer satisfaction, as well as technical support for all their products.
NOTE: KD Scientific syringe pumps are for laboratory use only.
Combining multiple parameters simultaneously with internationally recognizable icons allow the Legato Series to provide a new level of intuitive syringe pump operation.
|0.5 μl||0.103 mm||1.260 pl/min||1.325 μl/min|
|1 μl||0.146 mm||2.520 pl/min||2.651 μl/min|
|2 μl||0.206 mm||5.100 pl/min||5.299 μl/min|
|5 μl||0.343 mm||14.100 pl/min||14.690 μl/min|
|10 μl||0.485 mm||28.260 pl/min||29.380 μl/min|
|25 μl||0.729 mm||63.900 pl/min||66.370 μl/min|
|50 μl||1.03 mm||127.600 pl/min||132.500 μl/min|
|100 μl||1.457 mm||255.20 pl/min||265.100 μl/min|
|250 μl||2.304 mm||638.300 nl/ min||662.900 μl/min|
|500 μl||3.256 mm||1.275 nl/min||1.324 ml/min|
|1000 μl||4.608 mm||2.553 nl/min||2.652 ml/min|
|1 ml||4.699 mm||2.655 nl/min||2.757 ml/min|
|3 ml||8.585 mm||8.863 nl/min||9.204 ml/min|
|5 ml||11.989 mm||17.290 nl/min||17.950 ml/min|
|10 ml||14.427 mm||25.030 nl/min||25.990 ml/min|
|20 ml||19.05 mm||43.640 nl/min||45.320 ml/min|
|30 ml||21.59 mm||56.050 nl/min||58.210 ml/min|
|60 ml||26.594 mm||85.050 nl/ min||88.320 ml/min|
|Syringes (Min/Max)||0.5 µl to 60ml|
|Flow Rate||Minimum (0.5 µl syringe): 1.28 pl/min Maximum (10ml syringe): 25.99 ml/min Maximum (60ml syringe): 88.28 ml/min|
|Display||4.3 WQVGA TFT Color Display with Touchpad|
|Non-Volatile Memory||Stores all Settings|
|Connectors||RS485 - IEEE-1394 6 pos USB - Type B I/O & TTL - 15 pin D-Sub Connector|
|Linear Force (Max)||13.6 kg (30 lb) @ 100% Force Selection|
|Drive Motor||0.9 Stepper Motor|
|Motor Drive Control||Microprocessor with 1/16 microstepping|
|Number of Microsteps
per one rev.of Lead Screw
|Step Revolution||0.069 µm/step|
|Step Rate - Minimum||27.5 sec/µstep|
|Step Rate - Maximum||26 µsec/µstep|
|Pusher Travel Rate - Minimum||0.15 µm/min|
|Pusher Travel Rate - Maximum||159 mm/min|
|Power||100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse|
|Dimensions||22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)|
|Weight||2.66 kg (5.9 lb)|
|Operating Temperature||4 degree C to 40 degree C (40 degree F to 104 degree F)|
|Storage Temperature||-10 degree C to 70 degree C (14 degree F to 158 degree F)|
|Humidity||20% to 80% RH non condensing|
|Mode of Operation||Continuous|
|Regulatory Certification||CE, UL, CSA, CB Scheme, EU RoHS|