Shopping Cart

0 item(s) - 0.00$
Your shopping cart is empty!
Drop us a line
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Syringe pump infuse/withdraw Biotechnology

Syringe pump infuse/withdraw

Product Code:KDS Legato 210

Need more Info? (514) 354-2511 - 1-800-463-4363

  • Holds one or two syringes from 0.5ul to 140ml
  • High resolution color touch screen
  • Real time clock
  • Unparallel ease of use
  • Touch pad "lock" feature
  • LED light on front panel
  • Full metal chassis
  • Built in syringe table
  • Up to 75 lbs linear force
  • Advanced microstepping techniques
  • Built in RS485 interface
  • USB port
  • I/O & TTL interface
  • Continuous mode of operation
  • Spill dam


Legato 200
Our experience in pumps and fluidics was used to create the Legato 200 Series. Over the years, customers had asked to display more information simultaneously and make it easier to configure and run complicated multi-step programs. The high resolution touch screen interface offers unparalleled ease of use. Today’s demanding applications require better flow performance and repeatability down to 1 nl/hr. Legato offers 0.35% accuracy and 0.5% repeatability.
In today’s economic environment, multiple users with different experiments are using the same pump. The next generation of pump had to meet this demand to store and recall multiple programs. The pumps role in the experiment now changes more readily with multiple users and multiple tests being done using a single pump.
Worldwide use of our pumps and changing regulatory compliance meant designing the pump to meet RoHS and WEEE, CE, UL, CSA, and CB schemes. The Legato has lead free boards and is designed to the latest safety and EMI/RFI standards.


Accuracy ± 0.35%
Reproducibility ± 0.05%
Syringes (Min/Max) 0.5 ul to 140ml
Flow Rate Minimum (0.5 ul syringe): 5pl/min
Maximum (140ml syringe): 220.97 ml/min
Display: 4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile Memory Stores all Settings
Connectors RS232 - 9Pin D-Sub Connector
RS485 - IEEE-1394 6 pos
USB - Type B
I/O & TTL - 15 pin D-Sub Connector
Linear Force (Max) 34 kg (75 lbs) @ 100% Force Selection
Drive Motor 1.8 degree Stepper Motor
Motor Drive Control Microprocessor with 1/16 microstepping
Number of Microsteps per one rev.of Lead Screw 6,400
Step Rate - Minimum 27.5 sec/ustep
Step Rate - Maximum 26 usec/ustep
Pusher Travel Rate - Minimum 0.36 um/min
Pusher Travel Rate - Maximum 190.80 mm/min
Power 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions 8.89 x 25.4 x 27.94 cm (3.5 x 10 x 11 in)
Weight 4.9 Kg (10.75 lb)
Operating Temperature 4°C to 40°C (40°F to 104°F)
Storage Temperature -10°C to 70°C (14°F to 158°F)
Humidity 20 % to 80 % RH non condensing
Mode of Operation Continuous
Classification Class 1
Pollution Degree 1
Installation Category 11
Regulatory Certification CE, UL, CSA, CB Scheme, EU RoHS


Convertisseur d'unités