Votre panier est vide !
Pour nous joindre
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Vaporisateur anesthésique

Vaporisateur anesthésique

Modèle :Vapomatic

Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

Models for Halothane, lsoflurane or Sevoflurane 

Vapomatic is a top quality, superior performing, agent specific calibrated anesthetic vaporizer which will adapt to most anesthesia machines. Vapomatic is at this time the newest vaporizer on the market and the only such vaporizer currently made in North America. Vapomatic is produced with the experience of over 25 years of vaporizer design, testing, manufacturing and servicing of all makes and types of vaporizers and anesthetic equipment. Vapomatic is designed to provide outstanding performance at the low flow rates commonly used for veterinary anesthesia.

  • Temperature compensated. 
  • Output concentration stable during assisted respiration pressure pulses.
  • Filler-drain-contents window combined in easy access single unit.
  • Large dial with easy to see numbers has "off" lock and calibration indents
  • Dial Rotation: CW to decrease and "off" CCW for "on" and increase.
  • "Off" Position locks to prevent accidental actuation of vaporizer.
  • When "Off", vaporizing chamber is isolated and gas is bypassed to outlet.
  • Tamperproof adjustments - dial seal must be broken for access.
  • Sump may be removed for cleaning or wick replacement without disturbing calibration by removing one screw.
  • Inlet and Outlet fittings are standard 23mm male & female tapers and are individually replaceable.
  • Other connector options are available upon request.
  • Mounting holes in rear are interchangeable with other vaporizers.


Range of gas flow rates 0.1 to 10 liters/minute.
Range of ambient temp. 60'F to 90'F.
Range of anesthetic concentration 0.5% vol.
Models available for Halothane, Isoflurane or Sevoflurane
Calibration accuracy ±1% concentration or ±10% of dial setting at calibration points.
Liquid capacity (dry) Approximately 200 ml.
Weight (dry) Approximately 7.5 lb.
For mounting 2 vaporizers on Bickford anesthesia machines. Vaporizers are mounted back to back on a rotating bracket. To change from one to the other, i.e. Halothane to Isoflurane, disconnect inlet and outlet connectors, rotate isoflurane to face front, then reconnect


Cat. No. Description
12578 Turret Mount
20200 Spacer Kit , for mounting Vapomatic or Fluotec 3 to Matrx (VMC).
20300 Adapter plate, for mounting Vapomatic to Matrx (VMS).
05502 Vaporizer male connector for "cage mount". Fits Fluotec outlet and vaporizers with similar connections.
05502A Vaporizer female connector same as 05502 but female (inlet)
Vaporizer Options
20000 Vapomatic Vaporizer for Halothane
20010 Vapomatic Vaporizer for Isoflurane
20020 Vapomatic Vaporizer for Sevoflurane



Convertisseur d'unités