.jpg)
For preparing specimen of rigid plastic sheet, synthetic resin bonded laminate etc.
Standard specimens are required for tensile strength test, compression test, bending test and impact in JIS, ASTM etc.
| Machine à encocher |
| modèle 189-PN |
|
|
For preparing specimen of rigid plastic sheet, synthetic resin bonded laminate etc. Standard specimens are required for tensile strength test, compression test, bending test and impact in JIS, ASTM etc. |
|
| Specification |
| Specimen clamp | Feed speed 1.75mm/1turn |
| Cutter rotation speed | Approx.600rpm (60Hz), 500rpm (50Hz) |
| Notch depth | Manual : Depth 0~4mm (Unit 0.01mm) |
| V-notch cutter | Single tooth tip |
| Option | Air clamp, U-notch cutter |
| Power source | AC220V 1-phase 10A 50/60Hz |
| Dimensions/Weight | W420xD530xH380mm - 50kg |