GENEQ > Biotechnologie > Thermomètres

Thermomètre sans contact
modèle C-1600

  
Accurate • Low Cost • Easy to use!
The C-1600 Series Infrared Thermometers are self-contained, battery-operated devices for non-contact temperature measurement. Each model consists of a probe and a display unit. The power source is a single 9-volt alkaline battery.

Each C-1600 is a passive sensor which receives and measures (heat) radiation from an object. Since temperature is measured without contact, there are several important advantages associated with this technique. Measurements are made rapidly ( one second) so that thermal patterns  and transient phenomena can be observed. Heat is not removed from the measured object so that the accuracy of the readings is assured. Moving objects, dangerous materials and electrical components can be safely measured. For example, the C-1600 is ideal for nondestructive testing and design of electronic circuits.

A three position switch located on the display unit, is used to select power on °F, off and power on °C. When the battery voltage drops to 7 volts, a "LOW BAT" indication is displayed. The C-1600 probe easily attaches to the display unit for single-handed operation.

Measurements can be made from as close as 1ž4 (0.6 cm) from the source. As the distance to the source is increased, the diameter of the measured area increases proportionally. At 3 inches (7.6 cm), the measured area is about 1 inch (2.5 cm) in diameter. The effect of measuring at an angle, other thanperpendicular to the source, is to slightly increase the measured area. For a large uniform temperature source, the reading is unaffected by measurement angle or distance.

The analog output signal is 1 millivolt per degree. An optional analog output cable can be used to provide for recording or controlling temperature. Simply plug the cable into the analog output jack and connect the striped wires to your recorder or controller.

FEATURES
  • Measures temperature without contact
  • Fast response for transient temperature measurement
  • Sensitivity of 1°F (1°C)
  • Safely measures electrical components, dangerous and inaccessible materials
  • Switch selectable, degrees F or degrees C readout
  • Analog output optional
  • Powered by internal 9-volt battery or 110 VAC (optional)
    		•

    TYPICAL APPLICATIONS
    Non-Destructive Testing
  • Motors and Bearings
  • Circuit Boards
  • Jet Engines
  • Friction Testing
    		•
    Textiles
  • Dyeing
  • Drying
  • Heat Setting
  • Curing
    		•
    Electronics
  • Wave Soldering
  • Circuit Board Testing
  • Potting and Casting
    		•
    Pharmaceuticals
  • Tablet Drying
  • Affixing Labels
  • Package Sealing  
    		•
    Floor Covering
  • Laminating
  • Drying
  • Calendering
  • Printing
    		•
    Energy Auditing
  • Steam Trap Inspection
  • Thermal Insulation
  • Integrity
  • Power Distributing
  • Panels
  • Steam Lines
  • Heat Exchanges
    		•
    Rubber
  • Extrusion
  • Mold Control
    		•
    Food Processing
  • Baking
  • Pasteurizing
  • Mixing
    		•
    Paper
  • Web Monitoring
  • Calendering
  • Coating, Laminating
  • Printing
  • Lime Kiln Control
  • Shell Hot Spots
  • Plugged Syphons
    		•
    Plastics
  • Extrusion
  • Injection Molding
  • Vacuum Forming
  • Laminating
  • Calendering
  • Foam Sheet Extrusion
    		•
    Maintenance
  • Hot Bearings
  • Engine Performance
  • Boiler Hot Spots
  • Energy Auditing
  • Power Distribution Systems
  • Electrical Buss Bars
    		•

    SPECIFICATIONS
     
    C-1600
    C-1600P
    C-1600L*
    C-1600P*
    C-1600M**
    C-1600MP**
    C-1600H
    C-1600HP
    Temp. Range
    0 to 600°F
    0 to 315°C
    -67 to 260°F
    -55 to 125°C
    50 to 122°F
    10 to 50°C
    0 to 200°F
    0 to 90°C
    Sensitivity
    1°F / 1°C
    0.1°F / 0.1°C
    1.0°F / 1°C
    Accuracy
    ±1% of reading plus one digit
    1.0°F / 0.5°C
    Response Time
    1 second
    Repeatability
    ±1/2 of reading plus one digit
    Emissitivity Adjust
    Yes
    Target Size
    1/4" target at 3/4" distance (0.6 cm at 1.9 cm)
    Distance to target ratio 3:1 minimum target 1/4"
    Analog Output (1 milivolt/°)
    No
    Yes
    No
    Yes
    No
    Yes
    No
    Yes
    Externally Powerable
    No
    Yes
    No
    Yes
    No
    Yes
    No
    Yes
    Power Source
    9-volt alkaline battery or 110 VAC adapter (optional)
    Battery Life
    200 hours
    Size / Weight (Probe)
    1.3 x 1.3 x 6.2 in. (3.3 x 3.3 x 15.7 cm) / 5oz (142kg)
    Size / Weight (Display unit)
    3.2 x 1.3 x 6.2 in. (8.1 x 3.3 x 15.7 cm) / 9.6oz (272 kg)
    * For low temperature applications such as agricultural, freeze drying, refrigeration, cold storage
    ** For biomedical and near ambient temperature measurements requiring improved sensitivity and accuracy

    CAT. NO. DESCRIPTION
    C-1600P Standard range non-contact thermometer, 110VAC adapter
    C-1600P-220 Standard range non-contact thermometer, 220VAC adapter
    C-1600LP Low range non-contact thermometer, 110VAC adapter
    C-1600LP-220 Low range non-contact thermometer, 220VAC adapter
    C-1600MP Non-contact biomedical thermometer, 110VAC adapter
    C-1600MP-220 Non-contact biomedical thermometer, 220VAC adapter
    C-1600HP Precision range non-contact laboratory thermometer, 110VAC adapter
    C-1600HP-200 Precision range non-contact laboratory thermometer, 220VAC adapter
    Accessories
    C-WAND Wand that attaches to the probe to maintain constant from target
    C-STAND Probe stand for stationary applications requiring continuous measurement
    C-CASE Vinyl carrying case with belt loop