The Anditork First is specially designed to measure opening torques for bottles and jars. It is equipped with a grip plate that holds products from 0.5" to 8" in diameteer. The rubber-coated gripping fingers are adjusted quickly using a travel knob. Torque readings can be made by tightening or loosening it, and the RS232 output can be used to save the data to a PC.
- ANDITORK is designed for measuring
the opening/closing torque of bottles tops
and caps.
- A large plate mounted with rubberised
fingers can accept samples from 0.4” to
7.5”.
- It is possible to measure the torque in both clockwise and anti clockwise sense.
- The display is a CENTOR FIRST: display the peak torque or the current value.
- For small sized samples, the MICROTORK is made of a little plate with rubberised fingers able to maintain bottles up to 2.75” diameter.
Technical features
- Capacity: 100 lb Fin
- Units: Nm – Kgcm - lbin
- Resolution: 1 lbFin
- Accuracy: 0,5% PE
- Data acquisition rate: 1000Hz
- RS232 output
|
| Reference |
ANDITORK FT10 |
| Capacity |
100 lb Fin |
| Max diameter |
7.5 in |
The Anditork Easy is specially designed to measure opening torques for bottles and jars. It is equipped with a grip plate that holds products from 10mm to 200mm in diameteer. The rubber-coated gripping fingers are adjusted quickly using a travel knob. Torque readings can be made by tightening or loosening it, and the RS232 output can be used to save the data to a PC.
- ANDITORK is designed for measuring the opening/closing
torque of bottles tops and caps.
- A large plate mounted with rubberised fingers can accept
samples from 0.5 in to 8 in.
- It is possible to measure the torque in both clockwise and anti
clockwise sense.
- The RS232 output allows data transfer to a PC.
- The display is a CENTOR Easy to display the peak value and
the current reading in the same time.
- For small sized samples, the MICROTORK is made of a little plate with rubberised fingers able to maintain bottles up to 2 in
diameter.
Technical features:
- Capacity: 25, 50 and 100 lbFin
- Units: Nm – Lb/in – Lb/ft
- Resolution: 1/10000
- Accuracy: 0,5% PE
- Data acquisition rate: 1000Hz
- Display of current and maximum torque values
- Outputs: RS232, Analogic and Digimatic (Mitutoyo)
- Option: if the cap has a security ring, the test can be carried out using the ANDITORK ST,
which measures both the break (first peak) and the opening torque (max torque)
|
| Model |
lbFin |
kgFmm |
Nm |
Diameter |
| ANDITORK 3 |
25 |
30 |
3 |
0.5 to 8 in |
| ANDITORK 6 |
50 |
60 |
6 |
0.5 to 8 in |
| ANDITORK 10 |
100 |
100 |
10 |
0.5 to 8 in |
e.jpg)