- High accuracy:
±1.0% of reading of aiflow
- Rugged metal probe
and vane
- Intuitive user interface
design
- Ultra low speed
sensitivity down to
40 ft/mi
- Measure relative
humidity (%RH) from
5.0 to 95% RH
- Measure airflow in
extreme environments
from -20° to 100°C
|
- Temp measurements
from –20° to 80°C
standard
- Optional Temp probe
providing measurement
from –95° to 200°C
- Minimum and Maximum
air speed and temp
- Analog voltage output
and Communication
options
- Low power, high
performance, RISC
microprocessor
|
The Pacer DA420 Rotating Vane Anemometer is a high quality
instrument providing highly
accurate air velocity and temperature measurements in harsh environments
via a user-friendly
& intuitive interface. Applications include indoor air quality,
process control, flow hood
monitoring, and many other applications where precise air flow and temperature
measurement
is required.
|
| Specifications |
Ranges
|
|
|
|
Air Probe AP275: |
40
to 7800 FPM
0.2 to 40.00 MPS |
(feet
per minute)
(meters per second) |
| Air
Probe AP100: |
60 to 6800 FPM
0.3 to 35.00 MPS |
| Relative
humidity(% RH) |
5.0 to 95% RH |
| Temperature (using combination
HTP201 probe): |
-4° to 176F (-20° to 80°C)
|
| Temperature (using separate RTD
temperature probe): |
-139° to 392.0°F (-95.0°
to 200.0°C) |
Accuracy
Air Velocity: ±1.0% of Reading ±1 digit
Temperature: ±0.3% of Reading ±1 digit
Relative humidity : ±2.0% RH ±1 digit
Resolution
Air Velocity: 1 FPM or 0.01 MPS
Temperature: 0.1°F or °C
(1°F below -99.9°F)
Relative Humidity : 0.1% RH
Response Time
Relative Humidity: Up to 90% of change
in measured value in 15 seconds
Temperature: Less than 60 seconds
Temperature Drift - Humidity
±0.5% RH per 10°C (18°F)
Display
0.5” LCD, 4 digits
Operating Temp
Instrument: 32° to 125°F / 0° to 50°C
Air Probe: -4° to 212°F /-20° to 100°C
HTP201 Probe: -4° to 176°F /-20° to 80°C
Power Supply
3 AA alkaline batteries (Eveready E91)
Battery Life
Approximately 300 hours
Dimensions
Instrument: 6.5 inch X 3.25 inch X 1.5 inch
Probe AP275: 2.75 inch diameter
Probe AP100: 1 inch diameter
RH/Temp probe: 7 inch x 1 inch diameter |
Instrument Options Available
• Protective Rubber Boot and Splash
Proof Seal
• USB communications
• RS232 communications
• Analog 0-5 Volt output
• Additional Probe PN AP100 or AP275
• Extra extension and/or flexible rods
• Custom cable lengths
• Immersion RTD temperature probe
• Surface RTD temperature probe
• Air RTD temperature probe
DA430 comes complete with
• 1 pc. rotating vane probe head, AP275 or AP100
• 1 pc. HTP201 combination RH / temp
probe
• 3 pc. extension rod w/ handle grip
• 1 pc. flexible rod
• 1 pc. 5’ connecting cable
note: cable attached to APT100 probe
• 3 pc. AA 1.5 V alkaline |
