- Measure relative
humidity (%RH) from
5.0 to 95% RH - Calculated Dew Point reading
- Temp measurements from –20° to 80°C standard with 0.3% accuracy
- Optional Temp probe providing measurement from –95° to 200°C
- Protective rubber boot & splash-proof option
- Long battery life of over 300 hours
- Analog voltage output and Communication options
- Low power, high
performance, RISC
microprocessor - Intuitive user
interface design
The
Pacer DH500 Hygro-Thermometer is a high quality instrument providing
highly accurate
humidity and temperature measurements in a variety of environments via
a user-friendly &
intuitive interface. Applications include manufacturing, laboratory,
computer rooms,
environmental control, flow hood monitoring, and many other applications
where precise air
measurement is required.
Accuracy
Temperature: ±0.3% of Reading ±1 digit
Relative humidity : ±2.0% RH ±1 digit
Resolution
Temperature: 0.1°F or °C
(1°F below -99.9°F)
Relative Humidity : 0.1% RH
Response Time
| Relative Humidity: | Up
to 90% of change in measured value in 15 seconds |
| Temperature: | Approx.
60 sec in still air Approx. 10 sec in moving air streams |
Temperature Drift - Humidity
±0.5% RH per 10°C (18°F)
Display
0.5” LCD, 4 digits
Operating Temp
Instrument: 32° to 125°F / 0° to 50°C
HTP201 Probe: -4° to 176°F /-20° to 80°C
Power Supply
3 AA alkaline batteries (Eveready E91)
Battery Life
Approximately 300 hours
Dimensions
Instrument: 6.5 inch X 3.25 inch X 1.5 inch
RH/Temp probe: 7 inch x 1 inch diameter
Instrument
Options Available
• Protective Rubber Boot and Splash
Proof Seal
• USB communications
• RS232 communications
• Analog 0-5 Volt output
• Custom cable lengths
• Immersion RTD temperature probe
• Surface RTD temperature probe
• Air RTD temperature probe
DH500 comes complete with
• 1 pc. HTP201 combination RH / temp probe
• 3 pc. AA 1.5 V alkaline batteries
• 1 pc. carrying case PN 6002
