Box Furnace Model 1200°C Heavy Duty

Box Furnace
Model 1200°C Heavy Duty

Heavy-Duty 1200°C Box Furnaces feature a unique internal construction and outer shell design which reduces external surface temperatures without compromising interior temperature uniformity. Requires independent control console, model No. CC58114C (ordered separately).

FEATURES

Individual heating elements at chamber top, bottom and sides for uniform heat distribution
Swing down door provides convenient loading platform.
Helically coiled, high temperature alloy wire elements for extended service life
Unique Moldatherm ceramic fiber insulation to allow rapid heat-up, recovery and cool-down rates
High temperature insulation in vestibule and floating plug door to minimize heat loss and improve temperature control
Spring-loaded door holds door securely shut; door rests in horizontal position when open
Sight glass for convenient observation of heated load during operation
Refractory plate heating unit (Model BF51442C)
Heating element imbedded in Moldathermâ insulation (Model BF51542C)
Rugged, heavy-duty Inconel™ hearthplate supports load and protects the furnace from damage due to spillage
Long-life Platinel II thermocouple with 10' compensated lead wire and polarized plug
RS-485 communications port available as an option on independent control consoles.

SPECIFICATIONS
Model	Independent Controller	Electrical, 1Ø	Watts	Int. (WxF-BxH)	Ext.. (WxF-BxH)	Ship Weight
With refractory plate heating element, temp. range 100°C to 1200°C
BF51442C	CC58114C	208/240V, 50/60Hz	4800	7.5x14x5.25 in. 19x35.6x13.3cm	20x20x24.5 in. 50.8x50.8x62.2cm	145lbs (66kg)
With Moldatherm heating element (four sides), temp. range 100°C to 1200°C
BF51542C	CC58114C	208/240V, 50/60Hz	6200	10.5x14.5x9.5 in. 26.7x36.8x24.1cm	28x31x28.5 in. 71.1x78.7x72.4cm	335lbs (152kg)

CONTROLLERS

1200°C Digital, Single Setpoint Controller

Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), single segment, single setpoint, 1 ramp to setpoint. Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F.

Option P 1200°C Digital 16 Segment Programmable Controller

Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), 1 program with 16 segments for 8 ramps (up and down) and 8 dwells (timed holds). Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F.

Option B Overtemperature Control (OTC)

Adjustable digital overtemperature control, factory installed on selected control consoles with "B" designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via magnetic contacts through signal from independent thermocouple.

	CC58114C	CC58114PC	CC58114PBC
Digital
With Programmer
With Overtemp. Control
Electrical Volts, Hz	208/240V, 50/60Hz	208/240V, 50/60Hz	208/240V, 50/60Hz
Maximum Amps	30	30	30
Ext. (WxF-BxH)	14 x 19 x 10 in. (35.5 x 48.3 x 25.4 cm)	14 x 19 x 10 in. (35.5 x 48.3 x 25.4 cm)	14 x 19 x 10 in. (35.5 x 48.3 x 25.4 cm)
Ship Weight	40lb (18kg)	40lb (18kg)	40lb (18kg)