Box
Furnace
Model 1500°C Independent Control
Model BF51333C Box Furnace is constructed
with rugged firebrick insulation for stability, silicon carbide heating elements
to maximize heat transfer, insulating door plug and swing-down door for convenience
and safety.
e.jpg)
| SPECIFICATIONS | ||||||
| Model |
Independent Controller
|
Electrical, 1Ø
|
Watts
|
Int. (WxF-BxH)
|
Ext.. (WxF-BxH)
|
Ship Weight
|
| With refractory plate heating element, temp. range 100°C to 1200°C | ||||||
| BF51333C |
CC58125C
|
208/240V, 50/60Hz
|
5900
|
6x12x5 in.
15.2x30.5x12.7cm |
25x29x26 in.
63.5x73.6x66cm |
440lbs (200kg)
|
Note: Power cord and interconnecting wiring supplied
by customer. Fitted silicon-carbide hearthplate protects interior from spills.
Type "R" thermocouple integrated into chamber backwall, top. Includes
10' compensated thermocouple lead wire and polarized plug.
| CONTROLLERS |
|
| 1500°C DIGITAL, SINGLE SETPOINT CONTROLLER |
| Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), single segment, single setpoint, 1 ramp to setpoint. Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F. |
| OPTION P 1500°C DIGITAL 16 SEGMENT PROGRAMMABLE CONTROLLER |
| Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), 1 program with 16 segments, with 8 ramps (up and down) and dwells (timed holds). Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F. |
| OPTION B OVERTEMPERATURE CONTROL (OTC) |
| Adjustable digital overtemperature control, factory installed on selected control consoles with "B" designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via magnetic contacts through signal from independent thermocouple. |
|
CC58125C
|
CC58125PC
|
CC58125PBC
|
|
| Digital |
 |
|
|
| With Programmer |
|
|
|
| With Overtemp. Control |
|
||
| Electrical Volts, Hz |
208/240V, 50/60Hz
|
208/240V, 50/60Hz
|
208/240V, 50/60Hz
|
| Maximum Amps |
60
|
60
|
60
|
| Ext. (WxF-BxH) |
14 x 19 x 10 in.
(35.5 x 48.3 x 25.4 cm) |
14 x 19 x 10 in.
(35.5 x 48.3 x 25.4 cm) |
14 x 19 x 10 in.
(35.5 x 48.3 x 25.4 cm) |
| Ship Weight |
35lb (16kg)
|
35lb (16kg)
|
35lb (16kg)
|
Note: Power cord and interconnecting wiring supplied by customer. Contact us for CE Models.