GENEQ > Environnement > DCO Bloc-Réacteur

Bloc-Réacteur à DCO
 


Double Reactor Block
30 vial capacity 		Single Reactor Block
15 vial capacity		  

The Accu-TEST ® COD Reactor Block is an economical solution for digestion of chemical oxygen demand (COD) samples.

The Accu-TEST COD Reactor Block is easier to use and more economical than other heating methods for COD vial digestion. The Accu-TEST COD Reactor Block maintains temperature to within 2°C of 150°C for consistent results. A safety shield is available to protect against broken vials and acid spills. Samples are ready to be measured by titration or by a colorimeter after a two-hour digestion period. The unit meets all applicable electrical and safety standards. Two sizes are available - the single reactor unit can digest up to 15 16 mm vials simultaneously, and the double reactor unit can handle up to 30. Simplify your COD vial digestion with an Accu-TEST COD Reactor Block!
Single Reactor Block with Safety Shield

FEATURES
  • Fully automatic 110 V or 220 V operation
  • Unequalled accuracy and precision - maintains temperature of 150°C within +/- 2°C
  • Low cost and maintenance free
  • Compact and solidly built
  • Digests up to 15 or 30 vials at once
  • Chemical resistant safety shield available for extra safety
  • A thermometer fits in the block to ensure correct temperature
  • Available digital timer and thermometer
  • Simple and easy to use
APPLICATIONS
  • Simultaneous digestion of up to 15 or 30 reagent vials (16 mm diameter) at once
  • Testing of COD in wastewater, sludge, river water, lake water and stream water
  • Approved for reporting COD to EPA with a 2 hour reagent digestion period
  • COD can be determined in as little as 15 minutes
PRODUCTS SPECIFICATIONS
  • Factory preset at 150°C
  • 15 Tube Reactor external dimensions - 7" L x 8" W x 4" H (17.8 x 20.3 x 10.2 cm)
  • 30 Tube Reactor external dimensions - 9.5" L x 8" W x 4" H (24.1 x 20.3 x 10.2 cm)
  • Block Dimensions - 3.75" L x 2.95" W x 2" H (9.5 x 7.5 x 5.1 cm)
  • Electrical Classification - All Electrical Parts are either CSA or UL approved and unit is CE Marked.
  • Electrical Draw - 110 VAC/60 Hz or 220 volt/50Hz, 200 watt maximum
  • Suggested Maintenance - General cleaning after use is recommended
  • Safety Shield - 5.5" L x 7" W x 8.5" H (14 x 17.8 x 21.6 cm)
  • Shipping Weight - 15 or 30 tube - approx. 15 lbs. (7 kg)