GENEQ > Biotechnology > Transducers

Blood Pressure Transducer
Model 1050

  
The 1050 Blood Pressure transducer can be used to measure direct arterial or venous pressure in animals for research or teaching. The solid state pressure sensor is laser trimmed for linear, stable measurements. The REPLACEABLE 2 port cavity is easily flushed, and clear for visibility.

SPECIFICATIONS
Signal source monolithic, laser trimmed bridge
Operating pressure -50 to +300 mmHg
Overpressure -500 to +4000 mmHg
Sensitivity 5 uV / Volt excitation / mmHg
Accuracy < ±1.5% or ±1 mmHg (whichever is greater)
Max. excitation 10 VDC or AC (RMS, < 5 KHz.)
Zero offset ±30 mmHg Max.
Zero offset Temp. coefficient ± 0.25 mmHg / ° C
Operating Temp. 10 to 40° C
Volume displacement < 0.04 mmHg / 100 mmHg
Input impedance >500 Ohms
Output impedance < 900 Ohms
Leakage current < 10 uA at 115 VAC, 50 Hz.
Shock withstand 3 falls, 1.5 meters onto concrete
Max. Storage Temp. -25 to +70°C
Intended for use on Animals ONLY !!!