GENEQ > Environnement > Hydrocarbures-Ensemble d'analyse
| CLOR-N-OIL |
| Trousses de dépistage de BPC pour fluides diélectrique |
| U.S. EPA SW-846 Method 9079 |
| Designed to be used in the field, Clor-N-Oil is a fast, accurate method to test electrical insulating fluids for the presence of PCB. Each pocket-sized kit contains everything necessary to perform the test in less than 5 minutes. All premeasured reagents are sealed in glass ampules for safe, fast, consistent and accurate results. |
Clor-N-Oil is available for testing transformer oil at three different action levels; 20 ppm, 50 ppm, and 500 ppm. To eliminate the possibility of false negatives, Dexsil calibrates all Clor-N-Oil test kits on Aroclor 1242. Aroclor 1242 contains the least amount of chlorine (42% by weight) of the Aroclors found in electrical insulating fluids. By calibrating our test kits using Aroclor 1242, the user obtains the most conservative results. When Clor-N-Oil test kits turn purple, you can be assured your oil sample is below the action level. |
|
Analytes
Matrix Detection Method Action Levels Low Range: MDL MQL Interferences Overall Accuracy Analysis Time |
Chlorine/Chlorinated
Organics Used Oil, Solvents, Organic Liquids, Quantitative colorimetric titration 200 - 4000 ppm 50 ppm to 10,000 ppm 200 ppm 600 ppm Sulfur may cause false positive results 10% +/- MDL Less than 5 minutes |