GENEQ > Géomatique > GPS – Cartographie et Arpentage

GPS CMT Z33 à double fréquence
 


The CMT Z33 package includes CMT's PC-GPS 4.X software for comprehensive GPS project management and mapping. PC-GPS 4.X provides functions for mapping, Mission Planning, Batch Differential Correction, Static Point "Spread" analysis and Job Editing.

The software also supports GIS layering, raster images (i.e. DOQs, DRGs, aerial photographs, satellite imagery), multimedia objects (OLE 2.0), Microsoft® ODBC and extensive Coordinate Geometry (COGO) functions.


INCLUDES
  • RTK, OTF, Static
  • Stakeout
  • Geoid Model in field
  • Base Station Software
  • Office PC-GPS Software
  • Dual-F GPS Base unit
  • Dual-f GPS Rover unit
  • PC5L  Hand-held with 8 Megabyte RAM
  • Base Station RTK Radio
  • Rover RTK radio
  • Rover Backpack

CMT Field 4.X
Power survey functionality Stakeout (Point, Line, Arc, Slope)
Traverse, COGO, Offset
Coordinate system User-defined coordinates
Locate plane (NEZ)
SPC, UTM, LLA
GPS Survey/GIS data collection Points, Lines, Areas
Features/Attributes/Values
12-channel L1 C/A code, P code and full-wavelength carrier tracking
12-channel L2 P code and full wavelength carrier tracking
Quick Initialization with OTF This standard function allows the system to initialize while the GPS unit is moving.
GEOID model in rover unit for in-field accurate MSL (Mean Sea Level) height
RTK - Real-Time kinematic Position accuracy: 2 cm + 1 ppm
Static - Carrier Phase Differential Position accuracy: 5 mm + 1 ppm

SPECIFICATIONS
Accuracy
RTK
Static Horizontal (RMS) 1 cm + 1 ppm
Static Vertical (RMS) 1.7 cm + 1 ppm
Min. Static occupation time 2 seconds
Sub-centimeter accuracy with longer occupation time
Kinematic Horizontal (RMS) 3 cm + 1 ppm
Kinematic Vertical(RMS) 5 cm + 1 ppm
Azimuth (arc sec) .15 _ 1.5/baseline length in km
Initialization time to fix ambiguities Low as 10 sec after P-code lock on 8 satellites
Real-time Differential (DGPS)  
DGPS (RMS) < 1 m + 10 ppm
Post-processing
L1/L2 Carrier phase post-processing
Static (RMS) 5 mm + 1 ppm
Kinematic (RMS) 1 cm + 1 ppm
L1 C/A code post-processing
DGPS (RMS) <1 m + 10 ppm

FEATURES
  • 12 channel L1 / 12 channel L2
  • Full wavelength carrier phase on L1 and L2
  • P-code on L1 and L2
  • Z-Tracking
  • L1 C/A code
  • On-the-fly (OTF) initialization
  • Real-time kinematic for cm-accuracy
  • Operational under Anti-spoofing (AS) conditions
  • Up to 13 db signal-to-noise advantage over cross correlation for tracking weaker satellite signals
  • Fast signal acquisition and reacquisition algorithms
  • Low data latency
  • Up to 10 Hz position and raw data rate
  • Real-time data output
  • RTCM-SC104 V.2.1 for DGPS and RTK
  • Rinex Ver. 2.0
  • NMEA 0183 V. 2.01
  • 1 PPs timing signal
  • Event marker

PHYSICAL
  • Operating temperature: -40°C ro 65°C
  • Power consumption: 7.5 Watts
  • Input voltage: 10-28 VDC
  • Humidity: 100% condensing

DATA COLLECTOR
  • Waterproof (submersible)
  • Operating temperature: -40°C to 54°C
  • 8 MB RAM standard, 1 MB Flash EPROM
  • 2D/3D point, offset, slope staking
  • COGO traverse, inverse, intersect, horz, curve, create line, create arc, 3-point curve
  • NEZ calibration for working on local planes
  • LLA/UTM/SPC plus user-defined coordinates
  • Supports datums plus user-defined datums
  • Geoid model on-board for accurate MSL in the field