Geneq > Materials Testing > Flash Testers
Cleveland Open-Cup Flash Tester
 


Determines flash and fire points by the Cleveland Open-Cup method. Consists of test flame applicator, brass test cup, thermometer support, heating plate and electric heater. Applicator is precisely aligned per specifications and pivots for test flame application at specified temperature intervals. Hinged thermometer support raises to facilitate placement and removal of test cup. Adjust flame size using built-in needle valve and comparison bead.

Equipped with a 1000W nickel-chromium heater with stepless variable heat control for accurate repeat setting of temperature rate of rise per specifications. Heater unit is enclosed in a stainless steel housing with cooling vents. Test flame applicator and thermometer support are constructed of machined nickel plated brass.

Test methods
For flash and fire points of all petroleum products, except fuel oils and those having an open cup flash below 79°C (175°F).

Features
  • Conforms to ASTM D92 and related specifications
  • For flash points above 79°C (175°F)

Specifications
Conforms to ASTM D92, D6074, D6158; AASHTO T48; ANS Z-11.6; IP 36; ISO 2592; DIN 51376; FTM 791-1103, FTM 141-4294
Electrical Requirements 115V 50/60Hz, Single Phase, 6.5A; 220-240V 50/60Hz, Single Phase, 3.4A
Included Accessories Brass Test Cup
Dimensions (Lx Wx H) 10 x 5.5 x 14 in. (25 x 14 x 36 cm)
Net Weight 8.5 lbs (3.9kg)
Shipping Weight 12 lbs (5.4kg)
Shipping Dimensions 1.5 Cu. ft.

Cat. No. Description
K13900 Electrically Heated Model, 115V 50/60Hz
K13990 Electrically Heated Model, 220-240V 50/60Hz
Accessories
250-000-11F ASTM 11F Thermometer. Temp. Range: 20 to 760°F
250-000-11C ASTM 11C Thermometer. Temp. Range: -6 to +400°C
K14000 Cleveland Open Flash Cup. Precision machined brass with heat resistant handle