GENEQ > Biotechnology > Pumps
| Compulab® 3 Dilutor/Pump System |
| • Programmable to automate your fluid handling processes • Operate up to four pumps independently from one keypad or your PC |
|
Product
Description |
| Standard Fluid Transfer: • One bench top programmable controller capable of running up to four individual RD1 or RD2 pumps synchronized and independently. (Mix-or-match) • Flow rate of RD-1 pump is .4-3450 ml/min. The RD-2 pumps .5-5000 ml/min. • Easy connection of control and pump drives with supplied 3 1/2 ft RJ-12 (phone) cord. Maximum connection length of 15 ft. • Up to 30 user programs can be stored in memory. • Accuracy and Repeatability ±1%. • 1 to 999 cycles or continuous operation in dispense and dilute modes. • Manual or automatic timed delay cycling. • Interval delay time ranges from as low as 0.1 seconds to 2.780 hours programmed in 0.1 second increments. • User-friendly, menu-driven keypad with 80 character, backlit, alphanumeric, liquid-crystal display (2 x 40). • Twenty-key keypad facilitates direct data entry. Keypad provides tactile feedback. • No calibration necessary when changing volume with the same size tubing. • Both pump models are dual voltage 115/230 VAC (switchable) and meet UL 508, IEC 1010, cUL and CE regulations. The controller power is supplied by the pump drives. • Speed Control Feedback maintains accurate flow rate. 1/10 HP motor provides controlled responsive dispensing. • Direct input of volumes, flow rates, and speed. Ranges determined by tubing size. • Pump speed and dispense volume can be changed "on-the-fly" while pump is running. • Direct connection and control from a PC- compatible DB9 serial port. • The pump drives have an illuminated On/Off switch and seven-segment LED to indicate the pump address. • RD1 and RD2 drives come complete with chemically resistant pump head (molded of glass filled Noryl®). The RD1 pump head has three stainless steel rollers. The RD2 pump head has three Delrin rollers. • Operating temperature 0°C to 40°C. • IP rating: 22 Dispensing/Diluting: • Dispense delivery is set by volume, not limited to time, from 0.5 mL to 5000/L for RD-1 and 0.5 mL to 7000/L for RD-2 based on tubing size. • Programmable anti-drip feature reverses pump for set rotations after each cycle. Ideal for more viscous solutions. • Completed dispense cycles are confirmed with an audible prompt programmable for 0.0 to 60 seconds. Semi-automatic dispenses are individually prompted. • Direct connection and control in conjunction with Ohaus and Sartorius balances. |
 |
|
|
| Flow Rates in ml / min |
|
Cat.
No |
Description |
Tubing |
Size
13 |
Size
14 |
Size
16 |
Size
25 |
Size
17 |
Size
18 |
|
72-666-100 |
RD2 Pump |
ml / min |
.5-50 |
3-300 |
12-1200 |
26-2600 |
42-4200 |
50-5000 |
|
72-777-100 |
RDI Pump |
ml / min |
.4-40 |
2-200 |
7.5-750 |
17-1700 |
26.5-2650 |
34.5-3450 |
| Dispensing volumes ml / cycle |
|
Cat.
No |
Description |
Tubing |
Size
13 |
Size
14 |
Size
16 |
Size
25 |
Size
17 |
Size
18 |
|
72-666-100 |
RD2 Pump |
ml / min |
.5-50 |
3-300 |
12-1200 |
26-2600 |
42-4200 |
50-5000 |
|
72-777-100 |
RDI Pump |
ml / min |
.4-40 |
2-200 |
7.5-750 |
17-1700 |
26.5-2650 |
34.5-3450 |
| Specifications and ordering information |
| Compulab®3 Controller (includes software) |
| Cat.
No |
Dimensions
(LxWxH) |
Shipping
Wt. |
Power |
|
72-767-100 |
8-3/4" x 6-1/8"
x 3-1/4" front to 7-3/4" back |
5 lbs |
Powered by Pump Drive |
|
2.7 kg |
| Compulab®3 Pump Drives (includes dispensing wand) |
| Cat.
No |
Pump Drives |
RPM |
|
Dimensions |
|
|||
| Speed | Motor
|
IP Rating | LxWxH
|
Shipping
|
Power
|
|||
| Control | Size |
(Pump
Drive) |
Weight |
50/60
Hz |
||||
| 72-666-100 |
RD2 Pump |
ml / min |
.5-50 |
3-300 |
12-1200 |
26-2600 |
42-4200 |
50-5000 |
| 72-777-100 |
RDI Pump |
ml / min |
.4-40 |
2-200 |
7.5-750 |
17-1700 |
26.5-2650 |
34.5-3450 |
| Tubing Cross Sections | |||||
 |
|||||
Size 13 |
Size 14 |
Size 16 |
Size 25 |
Size 17 |
Size 18
|