GENEQ > Materials testing > Concrete Strength System
| Concrete Strength Windsor HP Probe System |
| Measure the compressive strength of concrete accurately and effectively, on site in the field |
The windsor
HP Probe System rapidly and accurately determines the concrete compressive
strength of a structure by driving a probe into the concrete with a known
amount of force. Improved and enhanced over thirty years, this modern
system is capable of measuring concrete with a maximum compressive strength
of 17,000 PSI (110MPA). It has been ruggedized for use in the construction
environment, yet refined to provide the user with a simpler system to
operate. An electronic measuring unit has been added to help ensure proper
test results which can be recorded for later review or uploading to a
personal computer. Two probe styles are available: one for lightweight,
low density concrete with air-filled aggregate and the other probe for
more standard mix designs. Also, two standard power settings facilitate
testing fresh concrete as well as mature mixes. Approved by municipalities
in the United States, Asia, and Europe, this system conforms to ASTM C-803,
BS 1881 and other testings standards. |
| Cat Number. | Description |
| Z-WP-1000 | Complete system with electronic depth gauge |
| Z-WP-534 | Complete system with manual depth gauge |
| Z-WP-500 | Driver unit |
| Z-WP-700 | Electronic measuring kit |
| U-PRS-01 | Box of 75 silver probes and 75 power loads |
| U-PRS-03 | Box of 75 gold probes and 75 power loads |
| Measures the compressive strength of concrete, mortar and brick in-situ, quickly, accurately |
A
non-explosive instrument, the Windsor Pin System uses a spring loaded
device to drive a steel pin into the concrete or mortar. The depth of
penetration of the needle correlates to the compressive strength of the
material under test. A removable chuck and a small pin size facilitate
the testing of mortar joints; this is the only system for testingthe in-place
strength of brick mortar joints. Conform to ASTM C-803. |
| Cat Number. | Description |
| Z-P-2000 | Complete system |
| Z-P-1040 | Box of 40 pins with gauge for Windsor Pin System |
 |
|