| Accuraacy, simplicity, versatility and flexibility are the watchwords of the Elcometer 355, a truly state of the art hand-held measuring system packed with time-saving and cost-cutting features. The key to the superiority of the Elcometer 355 is its measurement system which features a range of interchangeable Probe Modules capable of an accuracy of ±1% of the reading on a variety of coatings and surfaces, including ferrous and non-ferrous substrates. |
| The unit's large memory allows you to store up to 5000 readings in a fixed number of pre-determined batches and data can be output to a PC, datalogger or printer when and as required. A full selection of Probe Modules allows choice for the particular application. All models are supplied with calibration foils. |
- ±1% accuracy
- Full statistical analytisis, mean, standard deviation, number of readings, highest and lowest value
- Rugged aluminum case
- Data and time information
- Conforms to BS, ISO DIN, ASTM and SSPC methods of measurement
- Free software
- 5000 reading memory in 25 pre-set batches
- RS232 printer/PC output - serial and parrallel
- Traceable thickness standards
|
| Similar to the Elcometer 355 Standard Coating Thickness System, but with added features and memory. The unit's larger memory allows you to store up to 10,000 readings in a various user identified batches and data can be output to a PC, datalogger or printer when and as required. A full selection of Probe Modules allows choice of the particular application. All modules are supplied with calibration foils |
- ±1% accuracy
- High and low reasonable limits
- RS232 printer/PC output - serial and parrallel
- Full statistical analysis, mean, standard deviation, number of readings, highest and lowest value
- Rugged aluminum case
- Date and time information
- Conforms to BS, ISO DIN, ASTM and SSPC methods of measurement
- 10,000 reading memory in up to 9,999 batches (individually calibrated)
- Password protection
- Average and counted average mode
- Traceable thickness standards
- Free software
|
| Dimensions |
175 x 83 x 42mm (6.9 x 3.3 x 1.6 in.) |
| Weight |
650g (1.43lbs) - includes probe modules and batteries |
| Operating Temp. |
0 to 50°C (32 to 120°F) |
| Storage Temp. |
-10 to 60°C (14 to 140°F) |
| Data Output |
RS232C serial and parrallel output via 25 way D tyoe connector (female) |
| Batteries |
3 x 1.5V cells (alkaline) or 3 x 1.5V nickel metal hydride rechargeable cells |
| A355----S |
Elcometer 355 Standard coating thickness gauge |
| A355----T |
Elcometer 355 Top coating thickness gauge |
Standard model
e.jpg)
