.jpg)
The Disc Mill DM 200 is used for batchwise or continuous preliminary and fine size reduction of medium- hard to hard-brittle solids (up to 8 Mohs). The disc mill can grind such sample materials to an average final fineness of approx. 100 μm in one go. Thanks to its robust design, it can be used under rough conditions in laboratories and pilot plants, as well as online for the quality control of raw materials.
The DM 200 is particularly suitable for the following materials:
- ores, coal, coke, slag
- dental ceramics, steatite, sintered
ceramics, electrotechnical
porcelain, chamotte
- bauxite, quartz, clinker,
granite, concrete
- frits, glasses
- dried soil samples,
drilling cores, construction waste A particular advantage is the large sample feed size, with an edge length of up to 20 mm. The achievable final fineness of up to 100 μm depends on the set grinding disc gap width and the fracturing properties of the particular sample. In order to achieve such a final fineness the powerful DM 200 usually requires only a few minutes. Thanks to the exact gap width setting via a scale (accurate to 0.1 mm) the grinding results are reproducible. The Disc Mill DM 200 is very simple to operate. When the grinding process is finished the hinged grinding chamber housing is simply opened for cleaning.
