| Elcometer 106/6 Coatings on Concrete Adhesion Tester |
|
|
| Elcometer 106/6 Coatings on Concrete Adhesion Tester |
| The Elcometer
106/6 adhesion tester has been specifically designed to measure coatings on
concrete. Operating in a similar way to the rest of the Elcometer 106 Adhesion Testers, the Elcometer 106/6 allows for a 50mm (2”) larger dolly for testing coatings on concrete • Fully portable and comes in a carrying case – ideal for site tests • Hand operated so you don't have to worry about a power supply! |
|
| At a glance | |
| •
Designed specifically to meet the requirements of measuring coating adhesion
on concrete. • Designed for a 50mm/2” test dolly. • Easy to use, provides reliable results in both MPa & PSI. |
|
 |
|
 |
|
 |
The
most popular in the Elcometer PAT tester range, a manual hydraulic tensile
adhesion tester for measuring the bond strength of all types of paints, thermal
sprayed coatings, thin films, concrete coatings, ceramics, etc. A portable,
precision gauge with both MPa and PSI readings which gives accurate and comparable
test results both in the laboratory and on site. |
 |
A
20 or 40kN manual hydraulic tensile adhesion tester for testing of coatings
(including thermal sprayed coatings), on test panels, sprayed components.
Designed for testing with 50mm (2”) diameter test elements and with
the square 50 x 50mm (2 x 2”) test element for adhesion testing of tile
adhesives and other cementitious materials. |
 |
For
use with the Elcometer PAT, Elcometer 106, and Elcometer 108 Adhesion Testers,
this Portable Field Calibration Verification Unit is ideal for confirming
your adhesion gauge calibration. Connect the appropriate pull stub to the
unit, pull your adhesion tester and compare the adhesion tester reading to
the reading on the Portable Calibration Unit’s Display. |
 |
The
coating may be continuous and look good, but how well is it connected to the
substrate? The Elcometer 107 cross hatch cutter provides an instant assessment
of the quality of the bond to the substrate. Due to its rugged construction
this gauge is ideal for thin, thick or tough coatings on flat or curved surfaces.
An ideal field or laboratory test. |