Appareils numériques portatifs d’essai hydraulique modèles PFM6 - PFM6BD

Geneq > Essais sur Matériaux > Essais hydrauliques

Appareils numériques portatifs d’essai hydraulique

modèles PFM6 - PFM6BD - PFM8

PFM6	PFM6BD	PFM8
Flo-check® Digital Hydraulic Test Unit	Flo-check® Bi-Directional Hydraulic Test Unit	Flo-check® Digital Hydraulic Test Unit & Dynamometer
Accuracy of ±1%, full range Turbine flow sensor gives fast response Large 3-1/2 digit LCD for both flow and temperature Simple operation: one toggle switch controls power, flow and temperature; load valve offers fingertip control of pressure to 6000 PSI (41.4 MPa) Platinum resistance thermometer, swept wet well; fast and accurate	Provides in-line testing of bi-directional motors, servo systems and valves Has the lowest pressure drop of any bi-directional tester Same basic features and ease of operation as PFM6 model	Front panel selectable U.S. or metric readings Digital pressure to 6000 PSI (41.4 MPa) Portable dynamometer reads power (HP & kW) directly Large easy-to-use membrane switch selects flow, temperature, pressure or power Low noise input circuitry provides steadier readings when flow is pulsating or cavitating Auto/OFF automatically turns power off after 5 minutes with no flow signal
Compact, lightweight, self-contained portable tester with laboratory accuracy. Designed for fast diagnostic troubleshooting of all types of mobile or stationary hydraulic systems and components. Makes all flow, pressure and temperature measurements simultaneously from one point. Helical type pressure gauge provides pulsation dampening and high over-pressure capacity. Pressure relief disc protection. Low battery/over-range indicators. Metric units available.	Compact, lightweight, self-contained portable tester with laboratory accuracy in either direction. Designed for fast bi-directional diagnostic troubleshooting of all types of mobile or stationary hydraulic systems and components. Makes all flow, pressure and temperature measurements simultaneously from one point. Helical type pressure gauge provides pulsation dampening and high overpressure capacity. Pressure relief disc protection. Low battery/over-range indicators. Metric units available.	All-digital, compact, lightweight, selfcontained portable hydraulic tester and dynamometer. Designed for fast diagnostic troubleshooting of all types of hydraulic systems and components, including engine-pump combinations. Makes all flow, pressure, temperature and power measurements simultaneously from one point, in either U.S. or metric units (switchable). Silicon strain gauge pressure sensor. Offers other standard features of PFM6 model.

Specifications:

Material:
Housing: 2024-T351 Anodized aluminum
Turbine Rotor: T416 Stainless steel
Rotor Supports: 6061-T6 Aluminum;
Rotor Shaft: T303 Stainless steel
Seals: Buna N standard; Viton and EPR optional
Ball Bearings: 440 C Stainless steel
Hub Cones: 6061-T6 Aluminum alloy
Temperature Probe: 12L14 Steel (Zinc plate, dichromate finish)

PFM6/8 SERIES TESTERS
Valve Body for 15/30’s: cold rolled steel; 60/85/200 Body:12L14
Steel Stem – 303 Stainless steel
Poppet: 12L14 Steel, Hardened
Straightening section: for 15/30 is CA360 Brass;
for 60/85/200 is 6061-T6 Aluminum
Cones: 2024-T4 Aluminum
200 GPM: Sleeve – D.O.M. steel tube

PFM6BD SERIES TESTERS
Valve: Body - 12L14 Steel
Spool/Sleeve: 4340 Alloy Steel, Hardened
By-Pass Plate: 2024-T351 Aluminum
Straightening section: 6061-T6 Aluminum
Cones: 2024-T4 Aluminum

PORTS: SAE Straight Thread O-Ring Boss, Female, J1926/1;
BSPP ISO1179

MAGNETIC PICK-UP: Body – 12L14 steel, black oxide finish;
Nut – 12L14 steel, zinc plate, dichromate finish

PERFORMANCE:
Electrical Output Signal: Self-generating alternating pulse,
100 mV RMS (100 Hz) min.
Flow accuracy: ±1% of full scale
Repeatability: ± 0.2%
Pressure rating: 6000 psi (414 bar) maximum
Turbine response: ≤ 200 ms
Fluid temperature range: -4° to 300° F (-20° to 150° C)
Ambient temperature range: -4° to 131° F (-20° to 55° C)
Flow readout: linearity and zero shift = +/- 1 digit
Operating pressure: to 6000 PSI (414 Bar, 41.4 MPa, 420 kg/cm2)
Fluid temperature: to 300 F (150 C)
Readout accuracy: +/- 1 digit
Battery type: AA size alkaline; Life 50 hours

-CE Certified models are available in PFM6 & PFM6BD
series units.
-XXX-when ordering, please specify P-PSI, B-Bar, M-MPa,
K-kg/cm2.

Ordering example: FPFM6-200-B-C ordering PFM6-200 w/
SAE24 ports, pressure scaled in bar, and CE certified unit

Five or Ten Point Calibration Certificates are available and
traceable to NIST, ISO 9001 / ANSI Z540-1 & MIL-STD 45662A