GENEQ > Biotechnology > Glassware

Glassware Cleaner
Model Pyro-Clean® Trace

  
Pyro-Clean Trace is specially designed for the trace level analytical laboratory. Chemical and solvent cleaning can be time consuming, often requiring multiple solvent rinses or acid soaking to adequately clean to ultra trace levels. Chemical cleaning methods are expensive, requiring the purchase of consumables and the disposable of hazardous waste.

Glassware washers can be expensive to purchase and repair, require regular maintenance, as well as high cost consumables and cleaning agents, and may not deliver adequate performance for trace level organic cleaning.

The Pyro-Clean Trace is a better way to remove organic contamination without hazardous chemicals or expensive consumables. Cleaning is as easy as loading your dirty glassware and pressing start. Cleaning is performed automatically, leaving the operator free to move on to more important duties. Glassware is heated to 750-900°F for 30-60 min.

All Pyro-Clean systems are constructed with 304 stainless steel continuous weld interiors with a double gasket door system for an airtight seal. Each Pyro-Clean operates under a negative pressure to assure that no exhaust escapes into the lab. Space age insulation is used as part of a cool exterioe wall system. Over temperature protection. Electric door interlock, and pressure release systems are standard safety features.

FEATURES
  • Systems heat glassware to 750-900°F, removing all organic contaminants/residues
  • Eliminate acid/caustic soaking
  • Complete destruction of organics
  • Increases lab safety
  • Eliminate solvent rinsing
  • Reduces acid/solvent waste disposal
  • Requires no consumables or cleaning agents
    		•

    APPLICATIONS
  • Glassware preparation for drinking water
  • Wastewater analysis
  • Pesticide/herbicide analysis
  • QC laboratories: biochemical, pharmaceutical, agricultural, biotechnology, industrial
    		•

    SPECIFICATIONS
    Cleaning Temp. 750-900°F
    Temp. Controller Digital 0-950°F
    Timer Digital 0-900 hours
    Operating Controls Main Power, Start, Stop Reset
    Power Requirements 240V single phase, 4.5KW (18 amps)
    Venting Requirements To the outdoors or central exhaust

    SUITABLE FOR GLASSWARE PREPARATION FOR THE FOLLOWING EPA METHODS
    300E
    502.1
    504.1
    505
    506
    507
    508
    508.1
    509
    515
    515.2
    525
    550
    550.1
    608
    624
    625
    3510
    3535
    3545
    3550
    6610
    8015
    8260

    CAT. NO. DESCRIPTION
    		Electrical specs
    Capacity
    OV134510-33 220-240V, 50Hz No oxidizer
    1.75 cu.ft.; w/50Hz air pump
    OV134510-33 220-240V, 50Hz No oxidizer
    3.5 cu.ft.; w/50Hz air pump
    OV134710-33 220-240V, 50Hz No oxidizer
    5.7 cu.ft.; w/50Hz air pump