| CAT. NO. |
DESCRIPTION |
| HT-1 |
"Workhorse" probe for liquids, gases, semi-solids.
Plastic handle with straight stainless steel shaft. Not good for surface
temps. Max. Temp. 400°C. Time constant 0.5 secs. 5 ft. lead. Not Isolated. |
| HT-2 |
As HT-1 but with 9" shaft. |
| BT-1 |
For surface temperatures of solids, also for
liquids, gases and semi-solids. Probably our best general purpose probe.
Welded stainless steel shaft, plastic handle. Tip is .02" diameter bent
at right angle to probe to facilitate accurate surface measurement. 5 ft.
lead. Immersible. Max. Tip Temp. 240°C. Time constant 0.15 secs. Not
Isolated. |
| DPT Series |
Immersion probes for liquids. #304 stainless
steel welded shaft, wooden handle. 5 ft. lead. Max. Temp. 400°C (750°F).
Time constant 2 secs. Not Isolated. |
| DPT-12 12" shaft |
TFT-12 12" shaft |
| DPT-24 24" shaft |
TFT-24 24" shaft |
| DPT-35 36" shaft |
TFT-36 36" shaft |
|
| TFT Series |
Immersion probes for corrosive liquids. Similar
to DPT series but shaft is Teflon coated. Max. Temp. 150°C (300°F).
Time constant 3 secs. Isolated. 5 ft. lead. |
| PT-6 |
Sensor Six-Pack. For multi-point measurements.
Inexpensive, flexible, welded sensor beads, tough Kapton insulation, 5 ft.
leads. Max. Temp. 400° C. Time constant 0.01 secs. Per package of six.
Not Isolated. |
| PIT-12 |
For permanent installation. 12" lnconel shaft
1/8" dia. Can be formed to fit inside or outside any dia. pipe. Complete
with 1/8" NPT compression fitting. 10 ft. leads and quick-disconnect plugs
and sockets. Max. Temp. 400°C (750° F). Time constant 3 secs. Not
Isolated. |
| PIT-6 |
Has 6" stainless steel shaft; otherwise as
PIT-12. |
| GT-1 |
Air and gas probe. 24" #304 stainless steel
shaft, wooden handle. 5 ft. leads. For instant readings of temperature gradients
in environmental chambers, freezer boxes, etc. Max. Temp. 200°C. Min.
Temp. -200°C. Isolated. |
