GENEQ > Geomatics > Global Positioning System
| BU-353 USB Mouse GPS Receiver WAAS |
| BU-353 USB
Mouse GPS Receiver WAAS enabled by default - SiRF Star III w/ V3.1.1 Firmware |
The WAAS enabled BU-353 GPS Receiver
can be utilized in a variety of applications that may require a magnetic
mounting with a waterproof configuration. With non-slip on the base and
its compact design, the BU-353 is completely self-contained and waterproof.
It incorporates the latest SiRF Star III GPS chipset and an active patch
antenna so you receive the highest degree of GPS accuracy. Typical application may include, but not limited to marine, aviation, and commercial environments in such uses as fire truck, police cars, buses, utility & long haul vehicles. The extended 5 feet long cable allows for easy routing behind headliners and side panels to terminate at a USB connector for interfacing with your Laptop / ibook. / PowerBook. |
| Features |
| 1. SiRF Star III High Performance GPS chipset
- WAAS 2. High sensitivity (Tracking Sensitivity: -159 dBm) 3. Extremely fast TTFF (Time To First Fix) at low signal level 4. Support NMEA 0183 data protocol 5. Built-in SuperCap to reserve system data for rapid satellite acquisition 6. Built-in patch antenna. 7. Super-cohesive magnetic for mounting on the car 8. USB interface connection port. 9. Waterproof and non-slip on the bottom. 10. LED indicator for GPS fix or not fix. LED OFF: Receiver switch off LED ON: No fix, signal searching LED Flashing: Position fixed |
| Specifications |
| Chipset: SiRF Star III v3.1.1 firmware WAAS
Enabled by default Frequency: L1, 1575.42 MHz C/A code: 1.023 MHz chip rate Channels: 20 channel all-in-view tracking Sensitivity: -159 dBm Accuracy Position: 10 meters, 2D RMS ~5 meters, 2D RMS WAAS enabled Velocity: 0.1 m/s Time: 1us synchronized to GPS time |
| Datum |
| Default: WGS-84 |
| Protocol |
| GPS Protocol: Default: NMEA 0183 (Secondary: SiRF Binary)
SiRF Binary>> Position, Velocity, Altitude, Status and Control GPS Output Data: NMEA 0183 MEA V2.2 Protocol and supports command: GGA, GSA, GSV, RMC, VTG, GLL v2.2 (VTG and GLL are optional) GPS Transfer Rate: Software Command setting (Default: 4800,n,8,1 for NMEA) |
| Acquisition Time |
| Reacquisition: 0.1 sec., average Hot start: 1 sec., average Warm start: 38 sec., average Cold start: 42 sec., average |
| Dynamic Condition |
| Altitude: 18,000 meters (60,000 feet) max Velocity: 515 meters /second (1000 knots) max Acceleration: Less than 4g Jerk: 20m/sec |
| Power |
| Main power input: 4.5V ~ 6.5V DC input Power consumption: 80mA Protocol Electrical level: TTL level, Output voltage level: 0V~2.85V |
| Physical Characteristics |
| Dimension: 2.08" Dia (53mm dia, 19.2mm height) Cable length: 60” Operating temperature: -40F ~ +185F ( -40C to +85C) |