GENEQ > Environment > Conductivity
| Waterproof, Multi-Range, ATC Conductivity Meter |
| Model HI9033 & HI9034 |
| HI 9033 and HI 9034 have been proven time and again to hold up under extended use in wet, humid, dusty and muddy conditions. HI 9033 utilizes a single probe to perform all conductivity readings in four ranges. This allows the user to measure samples from deionized water to brine without having to switch or recalibrate the probe. |
HI 9034 measures total dissolved solids
(TDS) in three ranges to offer the highest accuracy when performing measurements
in diverse applications such as HVAC, waste water treatment and reverse
osmosis. All three ranges can be activated at the touch of a button without
having to change the conductivity probe. |
| FEATURES |
| One Probe for Many Ranges |
| The HI 76302W doesn’t need to be recalibrated or changed to measure in another range. |
| Waterproof |
| The HI 9033 & HI 9034 will resist the ingress of water & dust to protect its advanced circuitry, in industrial and field applications. |
| Four-Ring Method Excels |
| The proven 4-ring potentiometric method is so technologically advanced that it renders the 2-ring Amperometric method obsolete. |
| SPECIFICATIONS | ||
| HI9033 | HI9034 | |
| Range | 0.0
to 199.9 µS/cm; 0 to 1999 µS/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm |
0.0
to 199.9 mg/L; 0 to 1999 mg/L; 0.00 to 19.99 g/L |
| Resolution | 0.1
µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm |
0.1 mg/L; 1 mg/L; 0.01 g/L |
| Accuracy (@20°C/68°F) | ±1% Full Scale (excluding probe error) | |
| Typical EMC deviation | ±1% Full Scale | |
| Calibration | Manual single point through trimmer | |
| Temperature compensation | Automatic from 10 to 40°C (50 to 104°F) with ß of 2% per degree °C | |
| Probe | HI 76302W with ATC 1m (3.3') screened cable (included) | |
| Battery type / life | 1x9V / 100 hours approx. of continuous use | |
| Environment | 0 to 50°C (32 to 122°F); RH 100% | |
| Dimensions | 196 x 80 x 60 cm (7.7 x 3.1 x 2.4") | |
| Weight | 425g (15oz.); Kit: 1.4kg (3.1 lb.) | |
| CAT. NO. | DESCRIPTION |
| HI9033 | Supplied complete with HI 76302W interchangeable probe with 1 m (3.3’) screened cable, calibration screwdriver, 9V battery and instruction manual in a rugged carrying case. |
| HI9034 | Supplied complete with HI 76302W interchangeable probe with 1 m (3.3’) screened cable, calibration screwdriver, 9V battery and instruction manual in a rugged carrying case. |
| HI 76302W | Conductivity probe |
| HI 721317 | Hard carrying case |
| HI 7030L | 12880 µS/cm calibration solution (460 mL) |
| HI 7031L | 1413 µS/cm calibration solution (460 mL) |
| HI 7032L | 1382 mg/L calibration solution (460 mL) |
| HI 7033L | 84 µS/cm calibration solution (460 mL) |
| HI 7034L | 80000 µS/cm calibration solution (460 mL) |
| HI 7035L | 111800 µS/cm calibration solution (460 mL) |