| Our Basic Water Jacket Incubators are designed
and manufactured to accommodate tight
budgets without compromising fundamental
needs in quality and precision. Combine this
with the microprocessor controllers, heated
outer door, and tempered-glass inner door and
these units provide temperature uniformity,
while minimizing cold spots that lead to
condensation contamination. The humidity
level inside the chamber is maintained at
approximately 95%. |
 |
Model 2406 was designed and manufactured to accommodate tight budgets, while maintaining the fundamental needs of quality and precision. These units have PID microprocessor controllers, a heated outer door and a tempered-glass inner door. They provide exceptional temperature uniformity, while minimizing cold spots that lead to condensation and ultimately, contamination. Although they do not have a humidity display, the extremely stable temperature environment maintains constant humidity through evaporation at 95%. Double wall construction reduces these unit's footprint, so they fit in tight spaces as well as tight budgets.
- Infrared CO2 Sensor
- Heated Outer Door
- Independent Overtemperature Protection
- Quick Clean Shelf System
- 5 Year Limited Warranty
|
| Specification |
| Infrared (IR) Sensor, 6.7 Cu.Ft. 120V |
| Weight |
310.00 lbs |
| Capacity |
6 cu.ft. |
| Interior Dimensions WxDxH in. (cm) |
20 x 20 x 26 (52 x 51 x 65) |
| Exterior Dimensions WxDxH in. (cm) |
26 x 26 x 39 (67 x 67 x 99) |
| Temperature Range |
8°C above ambient to 60°C |
| Temperature Uniformity |
±0.35°C at 37°C |
| Electrical Specifications |
Volts: 120V Hertz: 50/60Hz Watts: 550W Amps: 5A |
| CO2 Range |
0-20% |
| CO2 Sensor |
IR |
| CO2 Rate |
< 5 minutes |
| Jacket Type |
Water |
| Relative Humidity Range |
to 80% |
| Shelving |
3 Supplied (16 Maximum) |
 |
odel 2406/2 was designed and manufactured to accommodate tight budgets, while maintaining the fundamental needs of quality and precision. These units have PID microprocessor controllers, a heated outer door and a tempered-glass inner door. They provide exceptional temperature uniformity, while minimizing cold spots that lead to condensation and ultimately, contamination. Although they do not have a humidity display, the extremely stable temperature environment maintains constant humidity through evaporation at 95%. Double wall construction reduces these unit's footprint, so they fit in tight spaces as well as tight budgets.
The audible/visual alarms for temperature and CO2 respond to out-of-tolerance conditions. They offer an independent overtemperature safety control to protect samples from overheating, and an optional CO2 tank switch/alarm to prevent prematurely exhausting the gas supply. Features include:
- Infrared CO2 Sensor
- Heated Outer Door
- Independent Overtemperature Protection
- Quick Clean Shelf System
- 5 Year Limited Warranty
|
| Specification |
| Dual Stacked, Infrared (IR) Sensor, 6.7 Cu.Ft. Per Chamber 120V |
| Weight |
600.00 lbs |
| Capacity |
13.4 cu.ft. |
| Interior Dimensions WxDxH in. (cm) |
20 x 20 x 28 (52 x 51 x 72) |
| Exterior Dimensions WxDxH in. (cm) |
26 x 26 x 40 (67 x 67 x 101) |
| Temperature Range |
8°C above ambient to 60°C |
| Temperature Uniformity |
±0.25°C at 37°C |
| Electrical Specifications |
Volts: 120V Hertz: 50/60Hz Watts: 550W Amps: 5A |
| CO2 Range |
0-20% |
| CO2 Sensor |
Infrared (IR) |
| CO2 Rate |
< 3 minutes |
| Jacket Type |
Water |
| Relative Humidity Range |
Up to 95% |
| Shelving |
3 Per Chamber Supplied (16 Maximum) |
.jpg)