Geneq > Environnement > Radiation-moniteur

Détecteur portatif numérique de radiations
modèles Inspector + et Inspector EXP+


Back

Inspector+ Handheld Digital Radiation Alert® Detector

Now with an adjustable alert, the Inspector+ is a small, handheld, microprocessor-based instrument which offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays. The digital readout is displayed with a red count light and a beeper sounds with each count detected. Other features include an adjustable timer, external calibration controls and selectable alert.
Inspector EXP+ Handheld Digital Radiation Alert® Detector
Now with a selectable alert, the Inspector EXP+ was designed for the requirements of emergency response personnel. It has the same valuable features, small size, and quality of the Inspector, but instead of the built-in detector, it has the added versatility of an external probe. The carrying case has a clear window panel providing full view of the readout, count light, and access to the switches. Convenient hand straps and a belt loop are provided for carrying the instrument. A small pocket is provided for a check source. The unique design of attaching the probe to the carrying case allows one-handed operation if desired. The protective probe cover folds easily out of the way during one-handed operation.


General Specifications
Detector
 Internal Halogen-quenched, uncompensated GM tube with thin mica window, 1.4-2.0 mg/cm2 areal density. Effective diameter of window is 45 mm (1.75 in.). Radiation symbol on front label marks the center of the detector.
Display
 4 digit liquid crystal display with indicators.
Averaging Periods
 Display will update every 3 seconds. At low background levels, the update is the moving average for the past 30-second time period. The timed period for the moving average decreases as the radiation level increases

Gamma Sensitivity
 3500 CPM/mR/hr referenced to Cs-137. Smallest detectable level for I-125 is .02 µCi at contact. Timer can set 1 minute sampling periods from 1 to 10 minutes.
Operating Range
 mR/hr - .001 (1µR) to 100 mR/hr CPM - 0 to 350,000
µSv/hr - .01 to 1000 CPS - 0 to 5000
Total/ Timer - 1 to 9,999,000 counts
Accuracy
 mR/hr ±10% typical (NIST), ±15% max - 0 to 100
µSv/hr ±10% typical (NIST), ±15% max - 01 - 1000
CPM ±10% typical (NIST), ±15% max - 0 to 350,000
(Referenced to Cs-137)

Alert Set Range
 mR/hr .001 - 50 and CPM 1 - 160,000. 70db @ 1m.
Count Light
Red LED flashes with each radiation event.
Audio Indicator
 Internally mounted beeper (can be switched off for silent operation)
Outputs
 Dual miniature jack drives CMOS or TTL devices: count to computer or datalogger. Submini jack input allows for electronic calibration
Anti-Saturation
 Meter will hold at full scale in fields as high as 100 times the maximum reading.
Power Requirements
 One 9-volt alkaline battery. Battery life is 2160 hours at normal background.
Temperature Range
 -10ºC to 50ºC (14ºF to 122ºF)
Weight
 Inspector: 275 grams (9.7 oz.) without battery.
Size
 150 x 80 x 30 mm (5.9 x 3.3 x 1.2 in.).
Includes
 Carrying Case, CE Certification
Warranty
 1 year limited, 90 day Warranty on GM Detector
Utility Menu
The Utility Menu offers several options accessible by holding down the + button while turning the instrument on.
• 3 second (fast response)
• Switches from mR/hr and CPM to µSv/hr and CPS
• Reset the cal factor to 100.
• Adjust the CAL factor.
• Reset all setting to default factory setting.

Accessories
Xtreme Boot
Waterproof Case
Observer Software
Stand
Wipe Test Plate

Cat. No. Description
SEINSPECT- Inspector+
SEINSPECEX Inspector EXP+

SEXTREMEBO

 Xtreme Protective Boot
SEWATPROCA Water Proof Case
SEOBSERVER Observer Software
SEWIPE-000 Wipe Test Plate (for inspector+ only)
SENISTCAL- NIST CALIBRATION