Sonde à pression d'enregistrement du niveau d'eau série Levelogger Junior 3001 de Solinst

Geneq > Environnement > Eau - Mesure du niveau et enregistrement

Sonde à pression d'enregistrement du niveau d'eau

Série Levelogger Junior 3001 de Solinst

The Levelogger Junior provides an inexpensive alternative for measuring groundwater and surface water levels. It combines a datalogger, temperature sensor, pressure transducer, and 5-year battery, in a small, maintenance free, waterproof stainless steel housing.
The Levelogger Junior features a non-volatile memory, with a capacity of 32,000 sets of temperature and water level data points. Readings are linear at a user-defined interval between 0.5 second to 99 hours. Accuracy is 0.1% FS, with a lifetime factory calibration.
If greater accuracy, sampling options, or ranges are required, the Solinst Levelogger EDGE has the functionality to suit your application. For conductivity datalogging, Solinst also offers the LTC Levelogger Junior. Compatible with Levelogger EDGE software and accessories, the Levelogger Junior is also SDI-12 compatible, can communicate using a Leveloader Gold data transfer unit, and is able to integrate into Solinst Telemetry Systems.

Features

Low cost
5 year battery life
32,000 data points
Accuracy of 0.1% FS
Real Time View
Compatible with Levelogger EDGE Series software and accessories

Operation

Programming the Levelogger Junior is the same as with the Levelogger EDGE. An Optical Reader or PC Interface Cable connects the Levelogger to a laptop or desktop PC. The intuitive Levelogger EDGE Software automatically detects the type of Levelogger that is connected. Programming, downloading, data management and export are easy. The Real Time View option allows immediate viewing of live water level and temperature readings. These compact dataloggers are very easy to deploy. Installation can be with direct read cables or by stainless steel wireline or Kevlar® cord suspension, avoiding the use of vented cables. The Levelogger Junior outputs temperature and compensated water level readings. The Barologger EDGE and Levelogger software allow easy barometric compensation. The Levelogger Junior also features helpful utilities such as self-test capability, a robust, non-volatile EEPROM memory and FRAM back-up memory for increased data integrity, also the ability to upgrade firmware for increased function and features.

Specification

Level Sensor:	Piezoresistive Silicon in 316L SS
Ranges:	F15/M5, F30/M10
Accuracy (typical):	0.1% FS
Accuracy (max error):	0.2% FS
Resolution:	0.028%, 0.021%
Normalization:	Automatic Temp Compensation
Temperature Sensor:	Platinum RTD
Accuracy:	± 0.1°C
Resolution:	0.1°C
Temp Compensation Range:	- 10°C to 40°C
Response Time:	3 to 5 minutes
Battery life:	5 Years
Clock Accuracy:	± 1 minute/year
Operating Temperature:	- 20°C to 80°C
Memory:	Non-volatile EEPROM, FRAM back-up
Maximum # Readings	32,000 sets of readings
Communication:	Optical Infra-Red to USB or RS232
Size:	7/8” x 5.5” (22 mm x 140 mm)
Weight:	154 g (5.4 oz)
Wetted Materials:	316L Stainless Steel, Delrin®, Viton®
Sampling Mode:	Linear, SDI-12, Real Time View (from 0.5 sec to 99 hrs)
Barometric Compensation:	Software Wizard and Barologger EDGE

Levelogger Comparison

Model 3001
	Levelogger Gold	Levelogger Junior
Warranty	3 Years	1 Year
Pressure Transducer	Piezoresistive Silicon in 316L Stainless Steel	Piezoresistive Silicon in 316L Stainless Steel
Calibrated Ranges:	15, 30, 60, 100, 300 ft, Atmospheric Barologger 5, 10, 20, 30, 100m, Atmospheric Barologger	15, 30 ft 5, 10 m
Accuracy (typical)	0.05% FS ± 0.010, 0.016, 0.032, 0.064, 0.328 ft. (± 0.3, .5, 1, 1.5, & 5cm) Barologger: ± 0.003 ft. (0.1 cm)	0.1% FS ± 0.02, 0.03 ft (± 0.5, 1 cm)
Resolution	M5/F15: 0.001 % FS, Other Ranges: 0.0006 % FS, Baro: 0.002% FS	M5/F15: 0.028 % FS M10/F30: 0.021 % FS
Calibration	Factory – Lifetime calibration	Factory – Lifetime calibration
Temp Comp Range	-10 to +40°C	-10 to +40°C
Temperature Sensor	Platinum RTD	Platinum RTD
Temperature Accuracy	± 0.05°C	± 0.1°C
Temperature Resolution	0.003°C	0.1°C
Operating Temp Range	-20 to +80°C	-20 to +80°C
Clock Accuracy	± 1 minute / year	± 1 minute / year
Battery Life	10 Years (based on 1 reading/minute)	5 Years (based on 1 reading/minute)
Size	7/8” x 6” (22 mm x 154 mm)	7/8” x 5.5” (22mm x 140mm)
Weight	6.3 oz (179 grams)	5.4 oz (154 grams)
Memory	40,000 Readings of Level and Temperature Superior Reliability EEPROM Memory with redundant backup of last 1200 logs	32,000 Readings of Level and Temperature Superior Reliability EEPROM Memory with redundant backup of last 1200 logs
Logging Rates	0.5 sec to 99 hours	0.5 sec to 99 hours
Logging Modes	Linear, Event & User-Selectable Schedules with 30 items, each with Sec, Min, Hours, Days or Weeks duration. SDI-12, Real Time View	Linear, SDI-12, Real Time View
Barometric Compensation	High accuracy, air-only, Barologger EDGE	Use Barologger EDGE
Altitude Input	-980 to 16,400 ft. (-300 to 5,000 m)	-980 to 16,400 ft. (-300 to 5,000 m)
Corrosion Resistant Coating	Zirconium Nitride (ZrN) PVD	None
Other Wetted Materials	Delrin, Viton, 316 L Stainless Steel	Delrin, Viton, 316 L Stainless Steel
Direct Read Capability	Yes	Yes
Leveloader Gold Compatible	Yes	Yes
Offset	Allows input in range equal to Altitude Range = -980 to 16,400 ft. (-300 to 5,000 m)	Allows input in range equal to Altitude Range = -980 to 16,400 ft. (-300 to 5,000 m)