An all new locking well cap, designed to support both 2" and
4" wells.
This new versatile, vented well cap is available in two
configurations. The first is designed to support our Levelogger
Series of products, the second is designed to support our Bladder
Pumps and Double Valve Pumps. Solinst Locking Well Caps are
convenient, durable, and suitable for numerous other applications
and installation types. |
 |
The Model 3001 Levelogger Well Cap Assembly is designed
to fit 2" wells (or 4" wells with Reducer), and provides options
for installing Leveloggers with wireline, Kevlar rope, or using a
Direct Read Cable.
When installing Leveloggers using a Stainless Steel wireline or
Kevlar rope suspension, the water level dataloggers are securely
supported when tied off to the eyebolt included on the underside
of the well cap insert.
When installing Leveloggers using a Direct Read Cable, the cable
simply fits inside the convenient well cap insert hole, when the
red dust cap is removed. For Levelogger installations where
a Barologger is to be installed in the same well, the well cap
supports up to two Direct Read Cables. Even with the two Direct
Read Cables installed, there is still an access hole available for
manual water level measurements or groundwater sampling,
without disturbing the down-hole Leveloggers. |
- Vented to equalize atmospheric pressure in
the well
- Supports up to two Leveloggers
- Lockable, secure installation
- Eyebolt provides sturdy tie off
- Fits both 2" and 4" monitoring wells
- Versatile design supports additional monitoring
access
- One design provides multiple equipment support
|
 |
e.jpg)