Geneq > Materials Testing > Cleanroom - accessories

Sealed edge cleanroom MicroSeal® – VP
 


MicroSeal®–VP is an ultrasonically sealed edge cleanroom laundered wiper required for ISO Class 3 and above environments composed of 100% continuous filament polyester knit fabric.
This combination of properties provides MicroSeal®–VP with the highest level of cleanliness, abrasion resistance and chemical compatibility required for ISO Class 3 and above environments and applications requiring critical control of contaminants combined with superior performance.

Key Attributes
  • 100% continuous filament polyester knit
  • Ultrasonically sealed edge for reduced fiber contamination
  • Laundered and packaged in Berkshire’s ISO Class 4 cleanroom

Details
Benefits
  • Critically low particles, fibers, ions and extractables
  • High abrasion resistance
  • Chemically compatible with IPA, Acetone and other solvents
  • High absorbency
  • Low endotoxin levels
  • Light weight, high absorbency material design reduces actual cost in use compared to heavier weight products

Environmental

  • Light weight, high absorbency design reduces landfill waste impact when compared to more traditional heavier
    weight designs
  • Complies with RoHS 2002/05 and REACH requirements

Applications

  • Designed for use in ISO Class 3 and higher cleanroom environments
  • Designed for the highest level of contamination control in critical processing applications
  • Oxidation, Metallization, CVD or Photolithography processes
  • Chamber cleaning and CMP processing
  • Stencil and other print roll cleaning applications
  • Steam autoclavable for aseptic applications
  • Cleaning of medical device products
  • Applying and removing cleaning and disinfecting solutions

Options
  • Value Pack Option
    The value pack option provides the same great performance in a more economical bulk packaging format.
  • Pre-Wetted Option
    The same wiper material can be provided in pre-wetted formats for reduced VOC emissions, increased convenience,
    increased productivity, improved solvent control and cleaning protocol repeatability and reduced costs.
  • Sterile Validated Option
    For aseptic processing areas, the same wiper material can be provided in a gamma irradiated validated sterile to a 10–6
    sterility assurance level. Dry and pre-wetted versions available.

Technical data


Notes:
 Technical data represented in this table are typical values at the time of publication. These should not be used as
product specifications.
Due to differences in test methods applied and equipment utilized by different wiper manufacturers, valid product
comparisons may only be obtained through side-by-side testing in the same test facility, under similar conditions
Third party testing can be performed upon request

Order information