GENEQ > Materials > Moisture Meters

Moisture Measurement System
Model MMS Plus

For effective cleaning & restoration
The moisture you can't see matters most when cleaning and restoring a property after water damage caused by storm, flood or fire. From hidden mold to unseen structural damage, undetected moisture risks health & property. Its oversight can create liability. That's why the right moisture meter makes the difference.
3 IN 1 MOISTURE MEASUREMENT SYSTEM
Measure
  • Measure moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, massonry and other building materials
  • Diagnose the extent of moisture intrusion for damage assessment and monitor drying out of building structures
  • Use deep wall pin type probes to measure moisture in walls, wall cavity insulation, sub and surface structures
Search
  • Search behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block
  • Non-invasive pinless radio frequency finds moisture up to 3/4 in. below surface
  • Search mode not adversely affected by surface moisture
Hygrometry
  • Hygrometry check the dehumidification process, monitors buildings for adequate ventilation affecting indor air quality
  • Measures relative humidity and temperature, dew point and surface temperature, surface proximity to dew point (condensation) and a grains per pound.
  • Use to detect conditions for molds and funfus growth which can lead to unhealthy living conditions.

3 MODES
  • Hygrometer mode measures relative humidity, ambient temperature, dew point and grans per pound with replaceable Hygrostick™ probe
  • Pin measure mode determine moisture content of wood and wood moisture equivalent (WME) in other building materials
  • Pinless measure mode uses radio frequence to detect moisture non-invasevely

FEATURES
  • Automatic gran-per-Lb calculations for specific humidity
  • Data-logging with PC interface
  • Interchangeable Hygrostick™ probes*
  • Optional low range RH probe from 0-40% RH*
* The use of two sensors rather than one for the entire humidity range ensures accuracy at either end of the spectrum


SPECIFICATIONS
Includes as Standards MMS Plus includes with grains/lb automatic calculation, data download software with cable, Hygrostick, surface temperature sensor, 5 iné deepwall probes, pin moisture probe, Hygrostick extension lead, wood calibration chart, calibration check device, spare pins, instructions, nylon pouch
Gross Weight 10.58 oz (300g) instrument only
2.5 lb complete kit
Dimensions (LxWxH) 7 x 2.75 x 1.9 in. (180 x 70 x 49 mm)
Max Needle Depth 0.4 in. (10 mm)
Display LCD
Batteries (included) 2 AA batteries
Measurement Range Pin (% WME) 6-99
Non-Invasive (RF) up to 1 in. (25.4 mm) deep 0-1000 (relative
Hygrostick (RH) Nominal 20-100% RH, 32-122°F (0-50°C)
Temp. Probe Range Nominal 15-120°F (-10 to 50°C)
Hygrostick Data Nominal
30-40% RH ±2.5% RH
41-98% ±1.75% RH
0.5-122°F (-18 to 50°C) ±0.6°F (0.3°C)
Low Range RH Sensor Nominal (Optional MMS Plus Only: 0-40% RH ±2%, Temp. 32-104°F ±0.6°F (0-40°C ±0.3°C))
Data Storage Store up to 1000 results with date and time stamp from all instrument functions

CAT. NO. DESCRIPTION
PRBLD5800LH MMS Plus 3 in 1 moisture measurement system