The only PAV System on the market that meets all of
the apparatus requirements. It delivers the dependable quality that
your SHRP binder laboratory demands.
Hinged, bolted PAV cover and compact stainless steel
cabinet --easy to maintain, fits against the wall or in a corner on
your laboratory table -- even fits under overhead shelves!
System Controller provides automatic timing of the
aging run and end-of-test shut-down. Displays critical data, and provides
for faster stabilization of temperature after pressurization. Improved
system performance and repeatability of results from elimination of
some operator manual functions. Stores temperature and pressure data
for later down-loading to a Windows equipped PC computer; can share
computer with other laboratory equipment. Year 2000 compliant, the controller
is available separately to upgrade older Model 9300 PAV Systems.
Precision stainless steel sample racks meet levelness
requirements.
Energy Efficient -- no special wiring required; can
run on optional back-up power supply during brief power outages [Prentex
Model UPS-9300 provides approximately 30 minutes back-up power]. Draws
a maximum of 525 watts during warm-up; less than 60 watts when at stable
temperature. Very little heat load on laboratory's HVAC system. Available
in 100-125 Volt , 10 Amp, 50-60 Hz ac and 208-252 volt, 5 Amp, 50-60
Hz ac versions.
Shipped Complete -- ready to connect to your wall electrical
power outlet, standard bottled compressed air and PC computer.
ASME Code-stamped pressure vessel with hinged bolted
cover, registered with the National Board of Boiler and Pressure Vessel
Inspectors and designed for operation at up to 150 C and 2.45 MPa .
Pressure vessels designed, manufactured and inspected to this standard
are accepted in North America and many countries worldwide. The 100%
stainless steel pressure vessel is supplied in accordance with lab safety
recommendations for asphalt pressure vessel.
PAV temperature is maintained +/- 0.3 C ; pressure
is maintained +/- 0.03 MPa during the aging period following stabilization
within the allowable time* following pressurization.
Meets all AASHTO and proposed ASTM apparatus requirements
regarding vessel dimensions, temperature and pressure control. Temperature
and pressure data are controlled to tighter standards than required
and are logged and stored in the System Controller for later downloading
to user's PC-type Computer.
Ensures multiple levels of safety in both temperature
and pressure control systems, preventing operation of the pressure vessel
in excess of its design limits. European Community marked.
Air Supply -- a regulator and connecting hose for bottled
industrial or breathable grade compressed air is included. [Compressed
oxygen must not be used!] Overseas customers must furnish a suitable
compressed air regulator.
Unsurpassed customer support. Telephone and FAX support
for troubleshooting allow most problems to be corrected on-site by the
user without necessitating a service call from an instrument repair
company or shipment to the factory for repair.
Over 200 users on 4 continents agree that the Model
9300 is "User-friendly" and "Well-designed".
Space-efficient -- occupies only 650 mm x 430 mm (251/2"
x 17") of counter space and requires only 790 mm (31") of
overhead clearance. Weighs only 73 kilograms (160 pounds) -- normal
laboratory counters and tables should provide adequate support.
The only PAV system on the market capable of operating
on a standard computer back-up power supply during brief electrical
outages!
Accessories -- available accessories include cover
bolt wrench, calibration instruments [N.I.S.T. traceable], extra sample
pan racks, sample pans, spare O-ring gaskets and more.
One-year parts and workmanship warranty (subject to
terms and conditions stated in warranty -- see distributor for details).
Delivery -- Delivery time for individual orders is
normally less than two months (F.O.B. Dallas, Texas).
|
