Rugged and Reliable pH/ORP Controllers Model 6309POT

Rugged and Reliable pH/ORP Controllers

Model 6309POT

Rugged and reliable pH/ORP analyzers/controllers

FEATURES

Measures and controls pH, ORP and temperature
Easy to setup and calibrate
5 programmable relays: 2 for pH, 2 for ORP and 1 for temperature
Isolated and reversible 4 to 20 mA output for a single parameter

pH/ORP Controllers Product Description

The Global Water 6309POT multiparameter pH/ORP Controller measures, analyzes, and controls pH, ORP and temperature in one easy to use unit. The pH/ORP Controller's setup and calibrations are done through a user-friendly menu that may be password protected. Calibrations can be performed quickly and accurately with automatic buffer recognition of U.S. or European buffer sets, with the values stored in the pH/ORP Controller's nonvolatile memory. A large backlit display on the pH/ORP Controllers provide pH, ORP, and temperature or pH, DO and temperature measurements, plus the current mA output and relay status.
The WQ250 multiparameter pH/ORP controllers provide accurate on/off control via the five programmable relays or the 4 to 20 mA output may be used for proportional control. A standard RS-485 output allows for remote access via PC compatible computer and makes it possible to link multiple pH/ORP controllers to a common control system. The pH/ORP controllers built-in temperature and Automatic Temperature Compensation (ATC) functions may be used with an ATC type sensor or with a 10K ohm thermistor.
At power up, the WQ250 pH/ORP controllers perform a self-diagnostic to ensure proper operation. pH/ORP controllers electrode efficiency can be displayed to indicate when electrode maintenance is necessary. Housed in a watertight (IP65), 1⁄4 DIN case, the 6309POT pH/ORP controllers include a terminal block that accommodates the tinned leads and spade lugs on industrial type pH and ORP electrodes.
NOTES: A BNC to Y adapter is required to maintain the IP65 rating when using sensors with a BNC connector. A signal amplifier is required for sensor cable runs over 40 feet.

pH/ORP Controllers Specifications
Parameter	Range	Resolution	Accuracy
pH	-2.00 to 16.00 pH	0.01 pH	± 0.01 pH ± 1 LSD
ORP (absolute/relative)	-2500 to 2500 mV / -3999 to 3999 mV	1 mV / 1 mV	± 0.2 % of span / ± 0.2 % of span
Temp	14 to 248 °F (-10.0 to 120.0 °C)	32.18 °F (0.1 °C)	± 32.18 °F (0.1 °C)
pH
Temp Compensation: Auto -10.0 to 120.0 °C Buffer Recognition: 4.00, 4.01, 6.86, 7.00, 9.18, 10.01 Buffer Temperature Range: 0 to 60 °C Electrode Offset Recognition: ± 100 mV at pH 7.00 - 91.7 to +108.3 at pH 6.86 Electrode Slope Recognition: ± 30 % at pH 4.00, 4.01, 9.18 or 10.01 Input Impedance: >1013 ohms Calibration End Point Sensing: Yes
Temperature
Temperature Sensor: Thermistor, 10.00 k ohm at 77deg F (25 °C)
4-20 mA Analog Output
Input Select: User selectable pH or ORP Current Output Range: 4 to 20 mA (isolated), programmable span Current Output Scale: User programmable, linear or log Maximum Load: 500 ohm Accuracy: ± 0.02 mA Isolation Voltage: 500 V DC
Relays
Control Type: 5 ON/OFF controls Relay Output: 5 A at 115 V AC or 2.5 A at 220 VAC, resistive load only
Power Supply: 115 V AC or 230 V AC at 50/60 HZ Communication: RS-485 Display: 128 x 64 graphical LCD with backlight Ambient Temp. Range: 0 to 122 °F (0 to 50 °C) Case: IP65, 1/4 DIN case, 148 mm depth Dimensions: 3 5/8"W x 3 5/8"H x 5 7/8"D (96 x 96 x 148 mm) Weight: 2.1 lb (950 g) Certifications: CE, ISO 9001:2000
pH/ORP Controllers Options & Prices
6309POT pH/ORP Controller Industrial pH/ORP Controller sensor not included.
pH & ORP Controllers Electrodes: Flat Surface, Self-Cleaning
WQ220-020 pH/ATC Controller Electrode 20 FT w/Spade & Tinned Leads
WQ620-020 ORP Controller Electrode 20 FT w/Spade & Tinned Leads
pH & ORP Controllers Accessories
600B-Y Adapter BNC Connector to Spade Lugs & Tinned Leads
WQ-T-010 Fitting 1” FNPT PVC Flow Through T-Fitting
RELATED PRODUCTS
RE300 Handheld ORP Meter Includes ORP electrode, sample cup with cap, batteries, and 48” neckstrap.
695ORP Industrial ORP Transmitter (ORP sensor not included)
WQ600 ORP/Redux Sensors
WQ Water Quality Sensors