GENEQ > Biotechnologie > Anesthésie
| Équipements pour le contrôle de la pollution |
| |
|
| BICKFORD PC-1 # 80005 |
Pressure Relief Pop-Off Valve with scavenging outlet. Replaces most older valves which do not have a scavenging outlet for carrying away waste gas overflow. Adjustable from fully open to fully closed with adjustable spring tension to set pop- off pressure. Transparent rotatable housing with standard 15 mm tapered male outlet connection, allows position and operation of the valve to be observed. Threaded base (3/4"-20) fits many anesthesia machines directly, others require an adapter. |
Adapters for PC-1 Pop-Off Valve to various anesthesia machines |
| CAT. NO. | MAKE | |
| 341601 |
Drager |
 |
| 34131628 |
Dupaco |
|
| 34131620 |
Ohio |
|
| 341901 |
Matrx |
|
| 347827 |
Foregger |
|
| 347827 |
Stephens |
| BICKFORD PC-3 # 80015 |
Vacuum Scavenging Attachment Controls the drawing off of overflow gases from anesthesia breathing circuits for disposal into a hospital suction system. |
 |
| FEATURES |
| • Mounts solidly
to anesthesia machine providing terminal connection for suction supply.
• Control valve built-in so that suction can be adjusted to equal input from anesthesia circuit avoiding excessive suction flows which may occur in installations with multiple O.R. sites. • Safety Relief Valve for positive and negative pressures to limit application of suction or back pressure to breathing circuit. • Breathing bag reservoir used to store pulsations of exhaled gases for evacuation with low continuous suction flow. Bag acts as a valuable indicator of in and out flow to and from system. • Input connection standard 15 mm diameter external taper fits 7/8" breathing tubes and 15 mm internal diameter taper fits endotracheal tube connectors which are available for any size tubing. • Mounting brackets available to attach unit to most makes of anesthesia machines. • The BICKFORD PC-3 Vacuum Scavenging Attachment is used in semi-closed, open, or non- rebreathing systems, with an outlet connection provided. Most systems can be converted by replacing the present open type pressure relief (pop-off) valve with the BICKFORD PC-1 Valve and use of the BICKFORD PC-2 Non-rebreathing System. |
| # 80016 |
Mounting Bracket For F.S., Matrx and Drager |
| # 11140 |
Segmented Tubing Non-conductive blue corrugated segmented 7/8" I.O. hose sold by the foot (please specify). |
 |
| BICKFORD OMNICON F/AIR |
| Anesthesia Gas Filter Unit |
 |
A sensible answer to anesthesia gas problems in the operating room, the F/AIR anesthesia gas filter was specifically designed to remove waste anesthesia gases such as ISOFLURANCE, HALOTHANE, ENFLURANE, etc.from the operating room environment. Economical to use, with an average useful life of 12 to 15 hours, the F/AIR is easily adaptable to anesthesia machines. The F/AIR can remove no less than 50 grams of pure halogenated anesthetic gases and can then be conveniently discarded. |
 |
| CAT. NO. | DESCRIPTION |
|
80000 |
F/AIR Kit (one each), 80120, 80020 and 18007 |
|
80120 |
F/AIR Cannister Unit |
|
80020 |
F/AIR Holder |
|
08106 |
Endo. Tube Connector, 6mm |
|
80005 |
BICKFORD PC-1 Pop-Off Valve |
|
80010 |
BICKFORD PC-2A NRB System |
|
18007 |
Scavenging Tube, 40" with 3 adapters |
|
81915 |
Adapter, 15 mm I x 22 mm M |
|
11140 |
Blue Plastic Scavenging Tubing
with 22 mm cuffs at 6 inch intervals. (specify length ) |
|
80122 |
Set of 3 adapters |