GENEQ > Biotechnology > Power Supplies

Power Supply
Model PS9009TX

FEATURES
  • 3000V, 300mA, 300Watts
  • Last settings are automatically restored at power up
  • Integrator - Timer
  • When output supply stops, a specific message is displayed.
  • Twenty switch keyboard for monitoring each function.
  • Four operating modes : Constant voltage, constant current, constant power or temperature limitation.
  • It is possible to perform electrophoresis with a constant parameter whilst limiting the others to selected values, including temperature.
  • Automatic crossover from one mode to another when output limits are reached. Flashing display indicates the constant mode.
  • Automatic RESTART in case of power failure during a cycle. When the power returns, an audible safety  alarm rings for 10 seconds then, the START mode turns on automatically at the preset values.
  • Recommended for over night DNA-RNA sequencing electrophoresis.
  • Automatic storage of the preset and elapsed values (minutes and V/Hr) in case of power
  • Failure or voluntary interruption during a cycle. This microprocessor controlled power supply is equipped with a circuit breaker which automatically cuts the electrical supply in case of ground leakage detection, (500mA) short circuit, open circuit or overload.

MEMORY CAPABLE OF STORING
  • 16 'one step' programs with automatic preset cut off.
  • 8 programs with up to 9 steps which automatically follow preset values for each step.
  • 1 specific program for low current <15mA (IEF).
  • LCD display with 2 lines of 20 characters.

TEMPERATURE CONTROL SYSTEM
The Model PS9009TX Power Supply is designed for automatic temperature regulation as well as that the Voltage, Current, Power. The optional temperature probe (ref. 119020) maintains constant temperature during electrophoresis by reducing or stopping the voltage, current, output when the set temperature is surpassed.

OPTION
  • Ref. 119020 Temperature probe equipped by adhesive flat surface for sequencer external glass plate

LOW CURRENT PROGRAM
Program coded P28 is a dedicated low current (<1mA) program that is operated and programmed in the same fashion as the other multiple steps programs. It is not used for sequencing or other applications requiring the use of high current.

SPECIFICATIONS
Output Range / Resolution 10-3000V / 10V
15µA-300mA / 1mA
0.3-300 watts / 1watts
0-99°C / 1°C
1-99999 V-hour / 1V-hour
1-9999min. / 1min.
Min. Regulated Value 10V, 1mA, 1Watt
Value Display Range / Resolution 0/3000V / 10V
0-300mA / 1mA
0-300watts / 1watt
0-99°C / 1°C
1-99999 V-hour / 1V-hour
1-9999min. / 1min.
Min. Output 10V, 15µA, 0.3W
Current Range With program #28: 0-300mA
Fault Detection Stop and displayed messages
Dimensions (WxDxH) 27 x 34 x 11
Weight 4kg

More informations on Applications and Specifications

CAT. NO. DESCRIPTION
119030 Power Supply for Nucleic Acid Sequencing, Model PS9009TX