GENEQ > Environment > Radiation Monitors

Personal Alarm Dosimeter
Model RADOS RAD-60


The essential tool for personal radiation protection

The RADOS RAD-60 Personal Alarm Dosimeter is a precise and reliable instrument for ensuring the personal safety of the user. Ideally, the RAD-60 is used in everyday radiation monitoring, in stand-alone conditions. If your needs grow for a more sophisticated system, the versatile RAD-60 can also be integrated into an Access Control System. The RAD-60 can be switched into System Mode, for the purpose of tracking Personnel Dose records and generating compliance reports.

The design includes state-of-the-art technology with built in memory for retrieving dose, even during power-down. It eliminates outside interference from shock and RF. The RAD-60 is easily programmed by the user, has a digital display and operates with a single AAA alkaline battery.
Could it get any easier than this ?

So simple use...with the push of a button, you can
  • Turn the unit on/off
  • Change the digital display to read dose or dose rate
  • Slect from several dose and dose rate
  • Alarm levels
  • Turn the chirp function on/off
  • Reset integrated dose
  • Perform a battery test
  • The large digital display gives instant dose or dose rate readings
  • The audible alarm is loud - better than 85 DBA
Reader and Software available for Dosimeter Configuration- Calibration-or Access Control 

Specifications
Radiation detected Gamma and X-Ray
Detector type Energy compensated Si-Diode
Measurement range Dose: 1 uSv - 9.99 Sv or 0.1 mrem - 999 rem
Dose Rate 5 uSv/h - 3 Sv/h or 0.5 mrem/h - 300 rem/h
Calibration Better than ±5% (Cs-137, 662 keV at 2 mSv/h), Hp(10)
Energy response Hp(10), 60 keV - 3 MeV, better than ±25%, up to 6 MeV, better than ±35%
Dose rate linearity Better than ±15% up to 3 Sv/h (300 rem/h)
Audible alarms Seven separate alarms,
  • sound level typically better than 85 dBA at 30 cm
  • integrated dose
  • dose rate
  • dose overflow
  • dose rate overflow at 3 Sv/h or 300 rem/h
  • low battery 1 and 2
  • defect
Alarm thresholds Six preset values each for integrated dose and dose rate-push button selection
Power supply One triple A alkaline cell, typical life is 1800 hours in background (dose mode)
Reader Infrared communication via bottom of the dosimeter
Button functions Front panel push button has the following selectable functions
  • change display priority (dose/dose rate)
    switch ON/OFF
    chirp ON/OFF
    reset integrated dose
    change alarm thresholds
    activate battery test
Temperature range -20 - + 50° C operational, humidity up to 90% RH, non-condensed; -20 - + 70° C storing
Dimensions 78 x 67 x 22 mm
Weight 80 g (including battery)