GENEQ > Materials testing > Infrared Thermometers
| Raytek MX Series Infrared Thermometer |
| Noncontact Temperature Measurement |
|
When
the job demands precision and accuracy. Broad temperature range, superior
optics and the True Dimension™ double-bright circular laser sighting
system make the MX series thermometers the most advanced portable thermometers
in the industry. The MX series thermometers featuring True Dimension coaxial
laser sighting are the only thermometers designed with precise infrared
beam tracking, resulting in more accurate measurement.
|
| MX4+NI Nonincendive Model |
| When safety is a concern and data logging and downloading are required, the new Raytek MX4+ Nonincendive (NI) model thermometer is the product to choose. It has the same great features as the standard MX4+ thermometers with the extra confidence of an approval needed for use in hazardous environments. The MX4+NI thermometer, Factory Mutual approved as a Class I, Division 2 nonincendive device, does not release enough electrical or thermal energy to ignite flammable gases or vapors under normal operational and environmental conditions. |
| True Dimension Sighting |
| indicating the true diameter of a measurement spot (90% energy). The target is highlighted at all distances with a center measurement dot and two accompanying diameter markers. At the focal point, where the measurement spot size is the smallest, the dots line up vertically, rotating as the unit is moved closer to or further from the target. This advanced coaxial system uses an extra bright* 635nm laser (tested to the same safety and power standards as less bright laser sights) to clearly highlight the targeted area. |
| Advanced Display |
|
• 100 temperature data logging capability |
| MX Series Accessories and Options |
| The MX4+ and MX4+NI thermometers additionally include: • DataTemp MX software • RS232 computer cable • Plug-in power supply (110 or 220 volt) (Power supply and cable not approved by FM for use in hazardous locations) • Thermocouple K probe |
| MX2 Options • Close Focus •Sub Zero • NIST Calibration Certification • Padded Pouch w/Belt Clip MX4+/MX4+NI Options • Close Focus* • Sub Zero* • NIST Calibration Certification • Thermistor (NTC probe) • Portable thermal printer • Thermal printer paper (5 rolls) • mV/degree output cable • Padded Pouch w/Belt Clip * Not available with MX4+NI |
| Sub Zero Option The Sub Zero (SZ) model option is designed for measuring lower temperatures. The SZ model uses an IR sensor specially calibrated to measure freezing temperatures from –50ºC (-58ºF) through 500ºC (932ºF). Close Focus Option The Close Focus (CF) option lets you accurately measure very small areas at the Focus Point– where the IR beam narrows. Paired with the True Dimension coaxial laser sighting system, extremely small objects 6 mm (.24 in) at 300mm (11.4”) can be easily measured. Ideal for electrical maintenance and refrigeration trouble-shooting. |
| Specifications and Features | MX2 |
MX4+ |
MX4+NI |
| Temperature Range | -30°C to 900°C
(-25°F to 1600°F) |
||
| Temperature Range with SZ option | -50ºC to 500ºC (-58°F
to 932ºF) |
||
| Accuracy (Assumes ambient operating temperature of 23ºC (73ºF)) | ±0.75% of reading
or ±1ºC (±2ºF) whichever is greater |
||
| Repeatability | ≤ ±0.5 of
reading or ≤ ±1ºC (±2ºF), whichever is greater |
||
| Response Time | 250 mSec (95% of reading) |
||
| Spectral Response | 8 to 14µm, thermopile
detector |
||
| Adjustable Emissivity* (from 0.1 to 1.0 by 0.01) |
• |
• |
• |
| Ambient Operating Temp. | 0°C to 50ºC (32°F
to 122ºF ) |
||
| Relative Humidity | 10-90% at 30ºC (86ºF) non-condensing |
||
| Storage Temperature | -20ºC to 50ºC (-25ºF to
122ºF) |
||
| Weight | 480g (1 lb. 6 oz.) |
||
| Power | 2 AA Batteries |
2 AA Batt. /AC adapter |
2 AA Batt. /AC adapter |
| Power Supply (110 or 220V), PS232 Computer Cable, 1.5 m (60 in), K thermocouple probe |
_ |
• |
• |
| Laser Class II | 3-dot laser sighting (Meets IEC Class
2 & FDA Class II requirements) |
||
| Single Laser Class III | Option (U.S. only) |
- |
- |
| Distance to Spot (D:S) | 60:1 (50:1 with Close Focus Option) |
60:1 |
|
| Minimum Measurement Diameter | 19mm (0.76") (6mm (0.24")
with Close Focus Option) |
19mm (0.76")
|
|
| Maximum and Minimum Temperature | • |
• |
• |
| Audible/Visible High/Low Alarm | • |
• |
• |
| Differential and Average Temperature | - |
• |
• |
| Bar Graph Display | • |
• |
• |
| 100 Points Data Logging | - |
• |
• |
| Display Hold | • |
• |
• |
| LCD Backlit | • |
• |
• |
| Temperature Display | ºC or ºF selectable
|
||
| Display Resolution | 0.1ºC of reading up to
900ºC (0.2ºF up to 999.8ºF)
|
||
| Data Graphing Software (Windows compatible) | - |
• |
• |
| Data Output: RS232 or 1mV per degree (ºC or ºF) | - |
• |
• |
| Hard Carrying Case | • |
• |
• |
| Tripod Mount | 1/4-20 UNC |
||
| Nonincendive (Factory Mutual Research Nonincendive Rated,
Class I, Division 2, Groups A, B, C, D; Class I, Zone 2 IIC; T4 Ta=50ºC when used with 1.5V alkaline batteries. WARNING: Battery changes nonhazardous locations only. Only Raytek temp probes part XXXMXTP or XXXMXTCK2 can be connected) |
- |
- |
• |
| Close Focus | Option |
Option |
Option |
| Subzero | Option |
Option |
Option |
| NIST DKD Calibration Certificate | Option |
Option |
Option |
| Warranty 1 Year** | • |
• |
• |
*For more
details, visit www.raytek.com/emissivity.htm ** US only. Warranty duration
may vary by country.
|
|||