Geneq > Teaching Equipment > Measure & Regulation

Flow control and regulation unit – Serial/parallel
Model RCD 100


  • The flow control and regulation unit comes complete with instrumentation and includes a technical and instructions manual.
  • Designed and manufactured to industrial standards.
  • This unit is designed for different levels and fields of study.
  • Input and output with female connections of 4 mm diameter. Options : - Interface and software for P.C - Utility module
  • The control and regulating modules can be connected in series or parallel.
UTILITIES
Electricity : 220/230 mono VAC Water : 10ll/mn - 3 bars (44 PSI) Compressed air : 6 bars (90 PSI) maximum

DIMENSIONS
Length : 780 mm - Width : 570 mm Height : 590 mm - Weight : 40 kg

Applications
Technical data of the elements in a regulating system. Sensor-Regulator-Activator-Perturbing element. PID or autoadaptable. Configuration of regulator. Characteristic curves (flow, valve opening, response time, etc...).

Specifications
Flow meter
 Flow meter with magnetic induction turbine
Exit signal : NPN 12 - 24 VDC 1 K
Signal converter : 4 - 20 mA proportional to the flow
Accuracy : ± 0.5% of the full scale

Control valve
 Nitrile membrane valve
Body, seat, valve, rod made in stainless
Steel 316 L
Seat and valve interchangeable
Signal : 0.2 - 1 bar
Range : 40 : 1

Regulator PID type with microprocessor
 Accuracy type : 0.2
With graduated scale
Relay exit, logical, uninterrupted
- Proportional belt of 0.5 to 1000 %
- Integral action temperatures from
0.1 to 100 min
- Shunted action temperatures from 0.01 to 10 min
Autoadaptable PID parameters are calculated by the relay to obtain an excellent regulation

Variable section flow meter
 Rotometer : accuracy : ± 3 % of the full scale

¼ pass disturbing valve