GENEQ > Essais sur Matériaux > Viscosité

Bain à température constante réfrigérée
Modèles LKV3000 et LKV4000

FEATURES
  • Improved design with enhanced performance and safety features
  • Standard -30ºC (-22ºF) LKV3000 model, and extended range -70ºC (-94ºF) LKV4000 model
  • Microprocessor PID temperature control with two decimal calibration offset
  • Dual digital displays show setpoint and actual bath temperature
  • Selectable temperature scale - Fahrenheit or Celsius
  • Conforms to ASTM D445, D6074 and related specifications for kinematic viscosity testing
    		•

    New refrigerated constant temperature bath series with improvements in operating features, safety and cabinetry. Advanced temperature control circuitry includes microprocessor PID design and two decimal calibration offset. Simple push-button controls and dual digital displays permit easy setting and monitoring of bath temperature.

    Baths accommodate four glass capillary viscometers using 2" (51mm) round holders (rectangular ports are available on special order). Bath medium is contained in a clear, evacuated Dewar flask, and glare-free fluorescent backlighting provides excellent visibility when working with the viscometers.

    STANDARD AND EXTENDED RANGE MODELS
    Standard LKV3000 model operates at temperatures from ambient to -30ºC (-22ºF). Extended range LKV4000 model operates at temperatures as low as -70ºC (-94ºF). Both models exceed ASTM temperature control accuracy and uniformity requirements throughout the operating range. Air-cooled hermetic compressors provide efficient operation with the use of CFC free refrigerants. Communications software (RS232, etc.) ramp-to-set, and other enhanced features are available at additional cost.

    BATH CONSTRUCTION AND SAFETY FEATURES

    Insulated steel cabinet has an attractive polyester-epoxy finish and is mounted on adjustable leveling feet. Chemical resistant working (top) surface has four round ports for 2" (51mm) viscometer holders and one port for a thermometer holder. Front viewing window provides clear, distortion-free visibility. Microprocessor controller incorporates circuitry that interrupts power to the heater in the event of an over-temperature condition or disconnection of the primary probe.

    A redundant adjustable controller and sensor probe provide added over-temperature protection, and an integrated low liquid level sensor removes power to the heaters if the bath liquid is not filled to the proper level or falls below during operation. Both over-temperature and low liquid level circuits will latch and prevent further operation of the bath until the fault is removed.

    SPECIFICATIONS
    Conforms to ASTM D445, D2532, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305
    Testing Capacity Four (4) glass capillary viscometers
    Viscometer Ports Four (4) round 2" (51 mm) ports
    Bath Dimensions 9.5" dia x 12" deep (24x30cm)
    Bath Capacity 3.7 gal (14 L)
    Temperature Control Display 0.1ºC/ºF resolution, calaibrate to 0.01ºC/0.01ºF
    Temp. Control accuracy and uniformity Exceeds ASTM requirements throughout the operating range
    Included Accessories Four (4) plastic viscometer port covers with handles; Thermometer holder
    Dimensions(LxWxH) 42 x 35 x 36 in. (107 x 89 x 91 cm); 42 Cu. ft.
    Net Weight 176 lbs (80 kg)
    Shipping Weight 300 lbs (136kg)

    CAT. NO. DESCRIPTION
       
    Temp. Range
    K22753 Model LKV3000, 115V, 60Hz Single Phase, 20.1A
    15 to -30°C (59 to -22°F)
    K22754 Model LKV3000, 220-240V, 50Hz Single Phase, 10.6A
    15 to -30°C (59 to -22°F)
    K22751 Model LKV4000, 115V, 60Hz Single Phase, 20.1A
    15 to -70°C (59 to -94°F)
    K22752 Model LKV4000, 220-240V, 50Hz Single Phase, 10.6A
    15 to -70°C (59 to -94°F)