Geneq > Biotechnology > Digital CCD Cameras

Retiga EXL Digital CCD Camera from Q Imaging
 


The QImaging® Retiga-EXL utilizes a cooled interline CCD and the remarkable speed of Lightwire™ 800 (an optimized version of the IEEE-1394b protocol). This low-noise camera’s 1.4-million-pixel spatial resolution and 14-bit digitization are ideally suited for bio-imaging applications such as live-cell microscopy. The Retiga-EXL provides QImaging’s hallmark combination of high performance and ease of use, enabling researchers to acquire quantitative results from their samples in a matter of seconds.

Camera models Camera Options
Includes: IEEE-1394b cable
(9-pin to 9-pin), IEEE-1394b
PCI card, power supply,
QCapture Suite software,
and access to SDK

Monochrome Retiga-EXL
Model: RET-EXL-L-M-14-C
  • Extended Warranty
    RGB Filter

Specifications

Applications Spectral Response
  • High-resolution, high-speed imaging
  • Live-cell fluorescence imaging
  • Cell-trafficking studies
  • Cell-motility studies

Features Benefits
High-Speed Readout Previewing & focusing in real-time
15fps full resolution @ 14 bits
Ideal for automated imaging applications
Extended Quantum
Effi ciency
Provides higher sensitivity than competitive interline cameras
(especially in the near-infrared region)
IEEE-1394b FireWire
Connection
800 Mb/s bandwidth capacity
Enhanced low-noise performance
Simple connectivity
Ease of use & installation
Portability with laptop computer
Low-Noise Electronics Quantitation & imaging of low-light-level signals
Peltier Cooling Reduces thermal noise for low-light long exposures while providing
temperature stability
Flexible Exposure & Gain
Control
Optimal integration over a wide range of light levels
External Sync & Trigger Tight synchronization with fl ashlamps, automated fi lters,
shutters, & microscope stages
Binning Increases sensitivity for quantitation & imaging of ultra-low-light signals Increases frame rate
Extensive Application
Software Support
Choose from a large selection of life science & industrial software for microscopy, machine vision, & video-streaming functions

CCD Sensor
Light-Sensitive Pixels 1392 x 1040
Binning Modes 2, 4, 8
ROI (Region of Interest) From 1x1 pixels up to full resolution, continuously variable in single-pixel increments
Exposure/Integration
Control
10µs to 17.9min
Sensor Type Sony® ICX285 front-illuminated interline CCD
Pixel Size 6.45µm x 6.45µm
Linear Full Well (1x1 Binning) 16,000e- (30MHz); 18,000e- (20MHz); 18,000e- (10MHz)
Read Noise 6.5e- (10MHz)
Dark Current 0.15 e-/pix/s
Cooling @ 25¾C Ambient 0¾C (regulated)
Digital Output 8 bits/14 bits
Readout Frequency 30, 20, 10MHz
Frame Rate 15fps full resolution @ 14 bits (30MHz)

Camera
Black-Out Mode Turns off all LEDs on camera to reduce reflection during
low-light applications; software controlled
Computer Platforms/
Operating Systems*
Windows® XP and Vista (32 bits/64 bits)
Mac OS 10.4
Digital Interface IEEE-1394b FireWire (two ports with simultaneous camera control)
External Trigger TTL Input
Trigger Types Internal, Software, External (Edge-Hi/Edge-Low/Pulse-Hi/Pulse-Low/ Strobe-Hi/Strobe-Low)
External Sync TTL Output
External RGB Filter Control Support for RGB filter
Analog Gain Control 0.8 to 34.7x
Optical Interface 2/3", C-mount optical format
Threadmount 1/4" – 20 mount
Power Requirements 36W; 12V
Weight 800g (1.75lbs)
Warranty 2 years
Operating Environment 0 to 27¾C, 80% relative humidity non-condensing
Storage Temperature -10 to 60¾C

Digitizer Speed
10Mhz
Binning (Pixels)
1x1
2x2
4x4
8x8
Frame Rate (Full Field)
5.9fps
10.3fps
18.7fps
29.2fps
Full Well Capacity
18,000e-
27,000e-
Read Noise
6.5e-
Dynamic Range
2769:1
4154:1

Digitizer Speed
20Mhz
Binning (Pixels)
1x1
2x2
4x4
8x8
Frame Rate (Full Field)
10.9fps
18.7fps
29.3fps
40.9fps
Full Well Capacity
18,000e-
27,000e-
Read Noise
8e-
Dynamic Range
2250:1
3375:1

Digitizer Speed
30Mhz
Binning (Pixels)
1x1
2x2
4x4
8x8
Frame Rate (Full Field)
15.1fps
24.6fps
36.1fps
47.2fps
Full Well Capacity
16,000e-
27,000e-
Read Noise
16e-
Dynamic Range
889:1
1688:1