Designed for interior
Built for construction
Built for construction
GENEQ > Arpentage > Niveaux rotatif au laser
| Laser horizontal et vertical |
| Modèle RUGBY 55 de Leica |
|
|
Designed for interior Built for construction |
|
| Suspended Ceilings With the Leica Rugby 55 mounted securely to the first piece of wall angle, set it to the desired height, adjust the ceiling grid using the laser beam on the target as the reference. |
Floor Layout Set up your Leica Rugby 55 over a control point using the unique Beam Down feature, then align the rotating or scanning beam to your second control point using the buttons on the Leica Rugby 55 or the remote control. |
Square The top plumb beam is always 90° to the main beam. Set up and align the Leica Rugby 55 to two control points, and the top plumb beam will provide an easy to use, 90° reference. |
| Level The Leica Rugby 55 is fully sealed and provides an accurate reference for both interior and exterior leveling applications. |
Interior walls Working with interior wall construction is made easy with the Leica Rugby 55’s bright, red beam that provides a clear reference for layout as well as horizontal and vertical alignment. |
Alignment Mounted to a tripod, batter board clamp or setting on its own, the Leica Rugby 55 can be used for the alignment and squaring of forms. |
| Rugged – Dependable
– Accurate – Versatile The Leica Rugby 55 provides the today's contractor with the tools needed for virtually any leveling or alignment job. The Leica Rugby 55 features an easy to use keypad, a watertight seal, variable head speeds, selectable scanning modes, a bright red beam and alkaline or rechargeable battery pack. |
 Scan-90 With the Leica Rugby 55 the scanning or stationary beam can be quickly positioned in 90° increments ... making layout easier by quickly moving the beam to the left of right side of the Leica Rugby 55. |
| Ceiling
grids – Floor layout – Raised access floors – Transferring
points Setting window supports – Cabinets – Interior walls – Tilt ups – Setting benchmarks Elevation control – Footings and Foundations – Plumb – Manual slopes |
|
| IR Remote Control Adjustments to the Leica Rugby 55 are the possible from virtually any direction using the full-function, infrared Remote Control. |
|
 |
 By selecting zero rps with the head speed button, the rotating head automatically positions itself in a plumb down direction for alignment of the Leica Rugby 55 over a reference point |
| Sleep Mode Pressing the Up and Down buttons together on the remote will put the Leica Rugby into sleep mode for two hours to save battery life without disturbing your setup. |
 |
The Leica Rugby 55 Interior Package A recommended package consists of the Leica Rugby 55, Carrying Case, Wall Mount Bracket, Remote Control, Ceiling Grid Targets (2) and either Alkaline or NiMH Battery Pack. |
| Leica Rugby 55 Specifications | |
| Operating
Range (Rotating Beam) |
300m (1000ft) Diameter |
| Operating Range (Plumb
Beam) |
up to 60m (200 ft) |
| Self-leveling Accuracy* | ±2.6mm at 30m (±3/32” at 100 ft) |
| Self-leveling Range |
±5° |
| Rotating Speeds |
0, 2, 5, 10 rps |
| Laser Diode (type) |
635 nm (bright red) |
| Dimensions (HWD) |
158 x 163 x 166mm (6.2 x 6.4 x 6.5”) |
| Weight with Batteries |
1.85 kg (4.0 lbs) |
| Battery Type |
Two D-cells or NiMH pack |
| Battery Life** |
Alkaline: 50 hours; NiMH: 30 hours |
| Operating Temperature |
-20 to +50°C (-4°F to +122°F) |
| Storage Temperature |
-40 to +70°C (-40° F to +158°F) |
| Dust / water (IEC60529) |
P55 |
| IR Remote Control | |
| IR Remote Range | Up to 40 m (130 ft) |
| IR Remote Battery Life | Up to two years |
| * Accuracy is defined at
25° C ** Battery life is dependent upon environmental conditions. Specifications are subject to change without notice. |
|