GENEQ > Environnement > Débitmètres
| Débitmètre pour les égouts ou canaux à ciel ouvert et senseurs |
| Modèle PCM F |
| • • • • |
Redundant
level measurement Latest intelligent Doppler technology Sensor-integrated high accurate Hastelloy® pressure diaphragm Parameter and measurement data storage on plug-in compact flash card (up to 128 MB) Long battery lifetimes thanks to optimised energy-saving process flow Various peripheral interfaces Measurement without modification of cross-sectional areas in existing profiles Easy sensor installation using variable fastening system |
PCMF |
The
PCM F including its accompanying sensors serves as temporary flow measurement
for slight to heavily polluted media in part filled and full pipes, channels
and flumes. |
|
The
large back-lit display enables very comfortable transmitter operation. Parameters
can be set very easy due to intuitive dialog mode menus. In addition to measuring flow using the newly developed intelligent Doppler sensor (which directly evaluates the flow velocity), it is possible to combine the PCM F with various sensors for level measurement purposes. |
Thanks to interfaces, the PCM F can be used as central unit for a variety
of peripheral devices. Measured and logged data is saved on plug-in CF
memory card. |
| Technical Information |
 |
| Transmitter | |
| Power supply | • rechargeable battery:
12 V / 12 Ah, lead gel • battery box: for 12 standard batteries 1,5 V (Type LR20) • power unit: 100 - 240 V AC; 50/60 Hz |
| Enclosure | • material: Polypropylene, impact
resistant • weight: approx. 2.0 kg (without sensor and battery) • protection: IP67 if cover is closed and locked |
| Operation temperature | -20 °C to +50 °C |
| Storage temperature | -30 °C to +70 °C |
| Max. humidity | 90 %, non-condensing |
| Display | back-lit graphic display, 128 x 128 Pixel |
| Operation | 18 keys, multilingual dialog mode (German, English, French, Italian...) |
| Plug sockets (IP68) | • 1 x 4 – 20 mA for external
level (2-wire probe, active) |
| Inputs via multifunctional socket |
• 1 x active digital input, supply
voltage 3.3 V DC • 1 x analog input, 0/4 – 20 mA (passive) |
| Outputs via multifunctional socket |
• 1 x relay (SPDT) switching capacity 250 V AC / 30 V DC, 5A switching frequency 5 Hz • 1 x voltage output 0 – 10 V |
| Accessories | |
| Memory card | Type:compact flash card; capacity: 128 MB |
| Readout adapter | adapter for PCMCIA interfaces, preferably for data readout via Laptop or Notebook |
| Card reader | with USB interface for connection to PC |
| Connector-Box | for simultaneous connection of more than one input or output to PCM F multifunctional socket |
| Power supply | rechargeable battery: 12 V / 12 Ah, rechargeable lead gel battery: 12 V / 26 Ah lead gel, for use in external battery box, battery box for 12 standard batteries 1.5 V (Type LR20) |
| Pipe mounting system | for temporary, non-permanent clamp fastening of wedge sensors (water-ultrasonic
combi sensor and airultrasonic sensor) in pipes DN 200 - 800 (200 - 800 mm diameter) and egg profiles up to h = 600 mm |
| Suspension bracket | with eyelet for fastening of PCM F on ladders or similar |
| Mains adapter/batt. charger | combi unit for lead gel battery charging or direct mains-powered operation 100 - 240 V AC / 50 - 60 Hz; IP 40 |
| Evaluation software | Type: NivuDat for Windows NT / 2000 / XP for data readout, data evaluation, creation of hydrographs, average values, hour, day and month values etc. |
| External battery box | external battery box for connection to PCM F via charger socket |
| Connection cable | for connection of peripheral units there are numerous pre-configured connection cables available |
| Open Channel / Sewer Flowmeter | Model PCMF |
| Doppler Sensors (Wedge sensor) | Model KDA-1 |
| Doppler Sensors (Pipe sensor) | Model KDA-2 |
| Pipe Mounting System (200 to 800 mm) | Type : RMS II |
 |
|
| Sensors | |
 |
|
| Pipe Mounting System | |
|
For mounting the sensor in the pipe |
 |
|