Geneq > Essais sur matériaux > Humidité - Sondes

Sonde pour humidimètre Delmhorst
 


2-E
  • Two pins
  • 5/16" penetration
  • Use on plaster, masonry, paper tubes, wood

4-E
  • Four pins
  • 5/16" penetration
  • Use on wood up to 1 1/2" thick

12-E
  • Double-roller type
  • Use on a moving web of paper or textile

15-E
  • Eight pins
  • 1/8" penetration
  • Use on veneer, cardboard, leather, paper

18-ES
  • Two pins (insulated)
  • 3 1/4" penetration
  • Use on heavy timber, poles and ties
  • Also available as type18-ED with depth gauge

19-E
  • Two blades
  • 5" long
  • Use on stacked paper, veneer

19-E/STC
  • Two 5'' long blades, bent to a 35° angle
  • Teflon coated w/ exposed tips
  • Use to check behind trim and baseboard molding

21-E
  • Two pins (insulated)
  • 3 1/4" penetration
  • Use on EIFS, insulation and roofs
  • Also available as a 21-ET with a tapped handle. This feature allows you to attach a threaded extension pole -- great for checking moisture in high and hard to reach places.
  • Also available as a 21-E/001 with 7" pins for EIFS

22-E
  • Two pins
  • 1/2" penetration
  • Use on plaster, masonry and wood
  • Will also take #496, insulated pins (1 1/8" penetration)
  • Also available as a 22-ET with a tapped handle. This feature allows you to attach a threaded extension pole -- great for checking moisture in high and hard to reach places.

26-ES
  • Two pins
  • 1 1/8" penetration
  • Use to measure moisture content in wood at different levels of penetration
  • Ideal for shell and core tests to detect moisture gradients and to test lumber with wet surfaces
  • Also available as type 26-ED with depth gauge

30-E/C
  • Used for bales,
  • 9 1/2" insulated pins with 8 1/4" penetration,
  • eliminate the effect of surface moisture

37-E/C
  • Eight pins (insulated)
  • 3/4" penetration
  • Use for yarn

42-EB
  • Two pins
  • 3/8" penetration
  • 3 ft. T-handle
  • Use for boards in stacks
  • Also available in 4 1/2 “ ft. length

43-E
  • Clamp type
  • Use for flat paper stock, fiberboard, thin veneer

55-E
  • Leaf type
  • Use for paper or textile on a moving web

59-E
  • Surface type
  • Use for granular material

H-4
  • Electrode handle
  • Use with 830 series, 831 and 832 electrodes

HP-1
  • Makes pilot holes in stucco to reduce pin damage

#830
  • Co-axial prod
  • Use on baled or shredded material
  • Available in 10", 18" or 36"

#831
  • Multi-pin prod
  • 1/2" penetration
  • Use on chopped hay, sawdust and shavings

#832
  • Multi-pin prod
  • 3 1/4" penetration
  • Use on bagged seed or grain
  • Also on sawdust and shavings

1235 10" prod
Used for testing standard bales. Attaches directly to the connector on top of the meter.

830-T/C
Used for modules, heavy duty steel, 36" T-handle