Spectrophotometer CM-2600d is the world's first portable spectrophotometer equipped with automatic UV adjustment function. CM-2500d is equipped with the same features and lower price. Containing a measuring area Ø8mm without instantaneous UV adjustment function.

FEATURES

Simultaneous measurement of SCI and SCE. Advanced Numerical Gloss Control High reliability and long life. Maintenance-free design Allow measurement in any position. Compact, lightweight with an easy-to-operate navigation wheel and large LCD display Promote accurate color communication. Conform to all widely accepted industry standards and allow measurements in all commonly used color spaces Measure the target with high accuracy. Easy-to-carry stylish body with an illuminated viewfinder

SPECIFICATIONS
Illuminating / Viewing system	d/8 (diffused illumination, 8° viewing angle), equipped with simultaneous measurement of SCI/SCE, (conforms to DIN 5033 Teil7, JIS Z 8722 Condition C Standard, ISO 7724/1, CIE No. 15, ASTM E1164)
Size of integrating sphere	Ø 52mm
Detector	Silicon photodiode array (dual 40 element)
Spectral separation device	Diffraction grating
Wavelength range	360-740nm
Wavelength pitch	10nm
Half bandwidth	approx. 10nm
Reflectance range	0 to 175%, résolution 0.01%
Light source	3 pulsed xenon lamps (2 xenon lamps for cm-2500d)
Measurement time	Approx. 1.5 sec. (approx 2 sec for fluorescent measurement)
Minimum measurement interval	3 sec for SCI/SCE is possible by a single measurement)
Measurement / Illumination area	MAV: Ø8 mm / Ø11 mm SAV: Ø3 mm / 6mm (selectable between MAV and SAV) only MAV is available for CM-2500d)
Repeatability	Spectral Reflectance: Standard deviation within 0.1% (360 to 380nm within 0.2%) Chromaticity Value: Delta E*ab within 0.04 (when a white calibration plate is measured 30 times at 10sec intervals after white calibration)
Inter instrument agreement	Delta E*ab within 0.2 (MAV/SCI) based on 12 BCRA Series II color tiles compared to values measured with master body
UV adjustment	Instantaneous adjustment (no mechanical adjustment required) *With UV400nm cut filter (no UV adjustment function for CM-2500d)
Measurement mode	Single/averaging (auto mode: 3, 5, 8 flashes / manual mode)
Interface	RS-232C
Observation	2/10° (CIE 1931/2°, CIE 1964/10°)
Observation light source	A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (Simultaneous evaluation is possible using two light sources)
Display data	Spectral value / graph, colorimetric value, color difference value / graph, PASS / FAIL result
Color space / colorimetric data	L*a*b*, L*C*h, CMC (1:1), CMC (2:1), CIE94, Hunter Lab, Yxy, Munsell, XYZ, MI, WI (ASTM E313 / CIE), WI / Tint CIE (Ganz / Griesser), YI (ASTM E313 / ASTM D1925), ISO Brightness (ISO 2470), Density status A/T
Data memory	700 (SCI/SCE as a set)
Tolerance judgment	Tolerance for color difference (both box and elliptical tolerances can be set)
Power sources	AA-size battery (x4), AC adapter
Dimensions (WxHxD)	69 x 96 x 193 mm
Weight	Approx. 670g (without batteries)
Operating environment	5 to 40°C; less than 80% RH (no condensation); installation category: 2; pollution degree: 2
Storage environment	0 to 45°C; less than 80% RH (no condensation)

STANDARD ACCESSORIES

White Calibration Plate Target Mask Ø8mm Target Mask Ø3mm (not supplied for CM-2500d) RS-232C Cable AC Adapter AA-size battery (x4)

Optional Accessories

Hard Case Dust Cover Set Dust Cover SpectraMagic QC Software Zero Calibration Box CM-A32