1. Safety lid - although light weight and
easily detachable, the lid cannot be
removed during electrophoresis without
breaking the electrical circuit
2. Ventilation grille - aids heat dispersal
during electrophoresis and can be
replaced by the optional thermostatic fan
kit (see FHS-KIT)
3. High voltage power cables - oriented
asymmetrically for correct polar
orientation - with 2mm shrouded output
connectors that are universally compatible
with modern high voltage power supplies
4. Safety handles - complimented by a new
streamlined and light weight design - allow
easy transportation around the lab
5. Spring-loaded plate clamps - act in
conjunction with counterbalanced silicone
gaskets to maintain uniform gel thickness
and even distribution of pressure across
the 4mm thick float glass plates
6. Aluminium back plate - serves as a heat
sink to prevent sample distortion and
'smiling'
7. Lower buffer chamber - clips directly
onto the anode and can also be used to
drain buffer from the upper chamber
8. Optional FHS-KIT - an adjustable,
thermostatically controlled fan kit powered
independently to maintain gel temperature
9. Melinex combs and spacers - 0.25 and
0.35mm thick - precision machined for
maximum loading accuracy and optimum
band resolution |
The TVS1000 - long format
for 20 x 50cm (W x H) plain
and notched glass plates
The TVS1400 - wide format for
33 x 41cm (W x H) plain and
notched glass plates, providing
increased sample capacity |
• Comprises a fan operated by a heat sensor
temperature control unit
• Gel temperature is set by manual adjustment of
the dial on the front panel of the control unit
• Fan is screwed onto the lid of the TVS1000 or
TVS1400 in place of the ventilation grille
• Fan is activated within 4°C of the preset
temperature
• Separations performed in less than 2 hours at
55°C at 75W constant power |
|
| Specification |
 |
| Cat. No. |
Description |
| TVS1000 |
Single-plate vertical gel electrophoresis unit with integral GRM
and aluminium back plate; upper and lower buffer chambers; lid,
2 x (20 x 50cm; W x H) plain glass plates, 2 x (20 x 50cm) notched
glass plates, 2 x 0.35mm melinex spacers and 1 x 0.35mm thick
48-sample shark's tooth melinex comb |
| Replacement Parts & Accessories |
| TVS1000-PG |
2 x (20 x 50cm) plain glass plates for TVS1000 |
| TVS1000-NG |
2 x (20 x 50cm) notched glass plates for TVS1000 |
| TVS1000-S0.25 |
2 x 0.25mm thick spacers for TVS1000 |
| TVS1000-S0.35 |
2 x 0.35mm thick spacers for TVS1000 |
| TVS1000-S0.75 |
2 x 0.75mm thick spacers for TVS1000 |
| TVS1000-S1 |
2 x 1mm thick spacers for TVS1000 |
| TVS1000-S1.5 |
2 x 1.5mm thick spacers for TVS1000 |
| TVS1000-S2 |
2 x 2mm thick spacers for TVS1000 |
| Cat. No. |
Description |
| TVS1400 |
Single-plate vertical gel electrophoresis unit with integral GRM
and aluminium back plate; upper and lower buffer chambers;
lid, 2 x (33 x 41cm; W x H) plain glass plates, 2 x (33 x 41cm)
notched glass plates, 2 x 0.35mm melinex spacers and
1 x 0.35mm thick 48-sample shark's tooth melinex comb |
| Replacement Parts & Accessories |
| TVS1400-PG |
2 x (33 x 41cm) plain glass plates for TVS1400 |
| TVS1400-NG |
2 x (33 x 41cm) notched glass plates for TVS1400 |
| TVS1400-S0.25 |
2 x 0.25mm thick spacers for TVS1400 |
| TVS1400-S0.35 |
2 x 0.35mm thick spacers for TVS1400 |
| TVS1400-S0.75 |
2 x 0.75mm thick spacers for TVS1400 |
| TVS1400-S1 |
2 x 1mm thick spacers for TVS1400 |
| TVS1400-S1.5 |
2 x 1.5mm thick spacers for TVS1400 |
| TVS1400-S2 |
2 x 2mm thick spacers for TVS1400 |
e.jpg)
